Connecting The Remote Mouse Receiver - Sharp Notevision PG-C30XE Operation Manual

Connecting the Projector

Connecting the Remote Mouse Receiver

You can use the remote control as a remote mouse.
Connecting to the USB port on a PC or Macintosh
1 Connect one end of the supplied USB mouse control cable to the corresponding terminal on the computer.
2 Connect the other end to the USB port on the remote mouse receiver.
Connecting to the PS/2 port on a PC
1 Turn off the power of the PC.
2 Connect one end of the supplied PS/2 mouse control cable to the corresponding terminal on the PC.
3 Connect the other end to the PS/2 port on the remote mouse receiver.
4 Turn on the power of the PC.
CAUTION
• Do not connect or disconnect the mouse control cables to or from the computer while it is on. This may damage your
computer.
• Do not connect both the PS/2 and USB mouse control cables to the remote mouse receiver.
• The wireless mouse functions can be used to operate computers compatible with PS/2 or USB type mouse systems.
15
USB mouse control
cable
PS/2 mouse control
cable
Remote mouse
receiver
Use the USB port (PC
or Macintosh) to
connect the supplied
USB mouse control
USB port
cable to the remote
mouse receiver.
Remote mouse
receiver
Use the PS/2 port
(PC) to connect the
supplied PS/2 mouse
PS/2 port
control cable to the
remote mouse
receiver.