Sharp Plasmacluster GS-XP07ER Operation Manual page 11

TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically se-
lected according to the room temperature and outdoor temperature when the
unit is turned on.
Modes and Temperature Settings
0 10 18
9
Heat Heat
( 4¡C) ( 3¡C)
1
indoor temp.
(¡C)
the figures in ( ) are temperature settings
During operation, if the outdoor temperature changes, the temperature settings will
automatically slide as shown in the chart.
MODE CHANGEOVER
During seasons when you need COOLING at daytime and HEATING at night, or if the
room temperature should become extremely higher than the temperature setting, due
to supplementary heating equipment, the mode will automatically switch between
HEAT and COOL mode to keep the comfortable room temperature.
outdoor
8 34 (¡C)
temp.
Cool
Cool Cool
( 4¡C)
( 5¡C) ( 6¡C)
Dry
( )
Room Temp.
- ¡C
Heat
( ¡C)
E-9