Card Playback - Sharp VL-Z950S Operation Manual

Digital Still Camera Features
Playback

Card Playback

Available mode:
Card Playback
You can play back and view still images
recorded on a card on the LCD monitor.
Operation button
1
Set the Media Selection switch to u.
2
Hold down the Lock button and set
the Power switch to w.
• The images recorded on the card are
displayed in a thumbnail format.
Lock button
S E L E C T I MG
Page number/total thumbnail pages
3
Press j, k, l or m on the Opera-
tion button to move the selection
frame to the desired image.
• Each time you press j, k, l or m,
the selection frame moves as shown
below.
S E L E C T I MG
Media Selection switch
Power switch
7 8 9
1 0
1 0 0 - 0 0 1 0
P A G E 2 2 /
NORMA L
F U L L MULT I
1 2 3
4 5 6
1 0 0 - 0 0 0 1
P A G E 1 2 /
NORMA L
F U L L MULT I
Note:
• Holding down j or k increases the
speed of motion of the selection frame.
4
Press the centre of the Operation
button.
• The selected image displays in full-
screen.
S E L E C T I MG S E L E C T I MG
Playback image number/
number of recordings
Available Operations during
Full-screen Display
• You can display the full-screen picture of the
previous or next image by pressing j or k.
• When holding down j or k, you can search
through the images on the card. The search can
be very fast, so it is recommended that the on-
screen indicators turns on to display the image
number.
• To return to a thumbnail of the images, press
the centre of the Operation button again.
Notes:
• You can also set in the mode screen to display
the images in full screen or thumbnails.
• Depending on the amount of image data
recorded by a camera other than this camcorder,
the picture quality indicator displayed during
playback may not match the picture quality
setting used during recording.
• The images bigger than 1280K960, e.g. images
recorded on other equipment, display as
thumbnails, not full screen.
• Do not play back any card storing a defective
image (with noise and distortion) created on
other equipment. If you mistakenly play back
data on such a card, set the Power switch to
OFF, remove, and never use it with this
camcorder.
Image file name
1 1 0 0 0 0 - 0 0 1 - 0 0 1 0 0
C A RD
[ [ ] ]
1 1 2 2 8 8 0 0
/ 1 / 1 1 0 1 0
NORMA L NORMA MA L
F U L L F U L U L L MU L MU L T I U L T I
Picture quality
indicator
87