Rotate Playback; Fine Picture Playback - Sharp VL-Z950S Operation Manual

Rotate Playback

Available mode:
Tape Playback
This function allows you to play back
images rotated 180°.
1
In Tape Playback mode, press the
MENU button to display the menu
screen.
2
Press l or m on the Operation
button to select V, then press the
centre of the Operation button.
3
Press l or m to select "ROTATE
PB", then press the centre of the
Operation button.
• Rotate playback indicator appears.
P L A Y B A C K
ROTA T E PB
A U D I O
A N L G
R E T U RN
1 +
AUDIO 2
RO T A T E P B
Rotate playback indicator
4
Press m to begin rotate playback.
• The image is rotated 180° upside
down.
To cancel rotate playback
Press the centre of the Operation button
in step 4 above.
S E T
E X ECUT E
1 + 2
D G T L O F F
Notes:
• When executing rotate playback during Tape
Playback, playback will stop. Press m to
begin rotate playback.
• Even if the camcorder is in rotate playback
mode, the image output via a DV connection
will display as normal playback.
• When you want to display the menu screen
during rotate playback, press the centre of
the Operation button.
• In rotate playback mode, you cannot perform
frame advance, slow, and picture effect
playback or copy an image from tape to
card.

Fine Picture Playback

Available mode:
Tape Playback
Fine picture playback improves the image in
Tape Playback mode by increasing the
brightness of the subject while leaving the
brighter portions of the image unaffected.
1
In Tape Playback mode, press the
DISPLAY/MODE SET button until the
mode screen appears.
P I C . E F F E C T
F I N E P I C .
AU D I O DU B
S T R E T C H P B
2
Press l or m on the Operation
button to select "FINE PIC.", then
press the centre of the Operation
button.
(Continued on the next page)
O F F
55