Windbreak - Sharp ViewcamZ VL-Z7S Operation Manual

1
Mount the optional zoom microphone
to the camcorder.
2
In Tape Camera mode, press the
DISPLAY button until the mode
screen appears (see page 31).
3
Press l or m on the Operation
button to select "MENU", then press
the centre of the Operation button.
4
Press l or m to select "EXECUTE",
then press the centre of the Operation
button.
5
Press l or m to select T, then
press the centre of the Operation
button.
6
Press l or m to select "ZOOM MIC",
then press the centre of the Operation
button.
S E T T I N G 1
Q K . R E T U RN
DG T L Z O OM
T A P E S P E E D
Z O OM M I C
R E T URN
7
Press l or m to select the desired
zoom microphone mode, then press
the centre of the Operation button.
ZOOM MI C T E L E
8
Press the DISPLAY button to turn off
the menu screen.
When the zoom microphone is active, the
zoom microphone indicator appears and
the zoom range indicator changes as shown
below.
Zoom microphone indicator
W
Zoom range indicator

Windbreak

Available mode:
Tape Camera
The windbreak function allows you to
reduce annoying noise from strong winds
when recording.
1
In Tape Camera mode, press the
DISPLAY button until the mode
screen appears (see page 31).
2
Press l or m on the Operation
button to select "MENU", then press
the centre of the Operation button.
3
Press l or m to select "EXECUTE",
then press the centre of the Operation
button.
4
Press l or m to select Y, then
press the centre of the Operation
button.
5
Press l or m to select "WIND", then
A U T O
T E L E press the centre of the Operation
O F F
button.
6
Press l or m to select "ON", then
press the centre of the Operation
button.
W I ND
7
Press the DISPLAY button to turn off
the menu screen.
To cancel Windbreak
Select "OFF" in step 6 above.
T Z OOM 1 0
Note:
• Keep the windbreak function off during
normal recording. If left on, the recorded
audio may sound somewhat muffled when
played back.
S E T T I N G 2
D I S
1 6 9 :
A UD I O MOD E
O F F
W I N D
R E T U RN ON
ON
45