General Control - Sharp QT-UH5H Operation Manual

General control

To turn the power on
Turn the power switch to ON position, this will bring the set to stand-
by mode.
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
At STAND-BY mode, red led will lights up.
Volume control
Press the VOLUME (+ or –) button to
increase or decrease the volume.
Equaliser
When the EQUALIZER button is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER button repeatedly until the desired sound mode ap-
pears.
FLAT (Not displayed) No equalisation.
ROCK
CLASSIC
POPS
JAZZ
Extra Bass (X-BASS)
Press the X-BASS button to emphasise bass sound.
0 .....
30 MAXIMUM
For rock music.
For classical music.
For pop music.
For jazz.
QT-UH5H
ENGLISH
E-6