Operation With Ac Power; Operation With Batteries - Sharp QT-UH5H Operation Manual

Operation with AC power

QT-UH5H
ENGLISH
Connect the AC power lead to the AC power input socket, then
connect the AC power lead plug to the wall socket.
Notes:
If the unit will not be used for a long period of time, remove the AC
power lead from the wall socket.
Connection of the AC power lead to the unit disconnects the
batteries.
Never use a power lead other than the one supplied. It may
cause an electric shock or fire.
E-5
To wall socket
AC 230 V
To AC INPUT

Operation with batteries

1 Disconnect the AC power lead, and remove the battery com-
partment cover.
2 Insert 8 "D", size batteries (UM/SUM-1, R20, HP-2 or similar)
into the battery compartment.
Insert the batteries according to the direction indicated on the
rear panel.
When inserting or removing the batteries, push them towards
the battery terminals.
Installing the batteries incorrectly may cause the unit to
malfunction.
3 Replace the battery compartment cover.
Battery replacement:
Replace the batteries when they become weak and/or recording or
playback is impaired. This may occur even though radio broadcasts
are audible.
Notes:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if they are weak or if the unit will not be
used for long periods of time. This will prevent potential damage
due to battery leakage.
Batteries are not included.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
2
3
4
1
5
7
8
6