Specifications - Sharp QT-UH5H Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source AC 230 V, 50 Hz
DC12V ["D" size (UM/SUM-1, R20 or HP-2)
battery x 8]
Power Power on: 12 W
consumption Power stand-by: 0.6 W
Output power PMPO: 32 W
MPO: 5.4 W (2.7 W + 2.7 W)
(AC OPERATION, DIN 45 324)
RMS: 4 W (2 W + 2 W)
(DC OPERATION, DIN 45 324)
Speaker type 2 way speaker system
10 cm (4") - 8 ohms x 2 - Speaker
4 cm (1 - 3/5") - 8 ohms x 2 - Tweeter
Dimensions Width: 410 mm (16-1/4")
Height: 165 mm (6-1/2")
Depth: 240 mm (9-1/2")
Weight 3.4 kg (7.5 lbs.) without battery
Radio
Frequency range FM: 87.5 - 108.0 MHz
MW: 522 - 1620 kHz
Tape recorder
Frequency response 80 - 8000 Hz (Normal tape)
Signal/noise ratio 40 dB
Wow and flutter 0.3% (DIN 45 511)
Motor DC 9 V electric governor
Bias system AC bias
Erase system Magnet erase
CD player
Type Compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency 60 - 20,000 Hz
response
USB
Class Mass storage class
Support File MP3/WMA (do not support DRM file)
Format support FAT 16 or FAT 32
Bitrate support MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Other USB supports version 2.0
QT-UH5H
ENGLISH
E-24