Sharp EL-9650 Operation Manual page 53

When the graph is in the normal mode (non-trace mode):
2 5
• to : Press anywhere and "
• The cursor pointer will appear in a point (fixed)* within "
touch to the same area.
• When not in the trace mode, it is possible to display and move the cursor pointer to
the specified location for all selections.
When the graph is in the trace mode:
1 3 6
to , : " " will appear with the first pen-touch.
Touching within "
4
: " " will appear with the first pen-touch.
Touching within the "
the " " disappears.
5
: When using the same procedure as in
along with the cursor movement will change to that of the graph line newly moved by
the cursor pointer.
* The location where the cursor pointer appears. The
" is displayed using a 8 × 10 dot configura-
onscreen "
tion. The relationship of the cursor pointer and the "
when pen-touching the second time is fixed as shown
below (" " is the boxed area and " " is the cursor
pointer).
• Since the split screen (
side of the screen (graph) moves the cursor in the same manner as the previously-
mentioned trace mode. Pen-touching the right side of the screen (list screen or
formula screen) changes graph formulas and moves the cursor pointer to the graph
curve position that corresponds to the list position.
" will appear with the first pen-touch.
" deletes " " and returns to the previous graph mode.
" moves and displays the cursor pointer within the "
Ï
) is always in the trace mode, pen-touching the left
" with the second pen-
4
, the formula displayed on the upper left
"
43
UNIQUE FUNCTIONS
" and