Enhancing Your System - Sharp WF-5000W Operation Manual

Enhancing your system

The connection lead is not included. Purchase a commercially available lead
as shown below.
VCR, DVD, etc.
To the line
output sockets
Red
White
Listening to playback sounds of VCR, DVD, etc.
1
Connect a VCR, DVD, etc. to the CD/LINE INPUT sockets.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the CD/LINE button.
4
Play the connected equipment.
You can enjoy sounds from the supplied speakers.
To record on a tape from VCR etc.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the CD/LINE button.
3
Press the
4
Press the
5
CD/LINE INPUT Play the VCR, etc.
RIGHT LEFT
Headphones
Before plugging in or unplugging the headphones, reduce the volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended impedance is 32
ohms.
Plugging in the headphones disconnects the speakers automatically.
Adjust the volume using the VOLUME control.
Red White
RCA lead
(not supplied)
06/2/24
button.
or button.
WF-5000W(U)3.fm
WF-5000W
ENGLISH
E-20
TINSEA095AWZZ