10 5. Sleep Indicator - Sharp WF-5000W Operation Manual

Timer and sleep operation (Remote control only) (continued)
WF-5000W
ENGLISH
Checking the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
"DAILY CAL", and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the settings in
order.
Cancelling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
"DAILY OFF", and press the MEMORY button.
Timer will be cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the same set-
ting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
"DAILY ON", and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by mode.
Sleep operation
The radio and cassette tape can all be turned off automatically.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
button to select "SLEEP", and
press the MEMORY button.
4
Press the or button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute
5
Press the MEMORY button.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically after the
preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation
finishes.
E-19
or button to select "ONCE" or
or button to select "ONCE CAL" or
or button to select "ONCE" or
or button to select "ONCE OFF" or
or button to select "ONCE" or
or button to select "ONCE ON" or
or
1-minute intervals
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select "SLEEP X : XX".
"X : XX" is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by pressing
the MEMORY button (steps 4 - 5).
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by mode,
proceed as follows.
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the or
and press the MEMORY button.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up to tape in
the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the tape and record radio
programmes whilst sleeping.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback or recording (steps
2 - 10, pages 18).
Timer playback or
recording setting
Sleep timer setting
1 minute - 3 hours
Sleep operation will Timer playback or recording
automatically stop. start time
Caution:
When using the cassette deck, be sure the tape length is long enough to per-
form both functions. If you want to sleep and wake up listening to a tape, and
the length of the tape is shorter than the sleep timer setting, timer playback or
recording will not be possible.
06/2/24 WF-5000W(U)3.fm
button to select "SLEEP OFF",
End time
Desired time
TINSEA095AWZZ