Adjusting The Air Flow Direction - Sharp Plasmacluster AE-Z40KR Operation Manual

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
1
Press the SWING button(
• The vertical airfl ow louvre will swing.
2
Press the SWING button(
when the vertical airfl ow louvre is at the
desired position.
HORIZONTAL AIR FLOW DIRECTION
1
).
2
) again
1
2
NOTE:
• The adjusted position will be memorized and will
be automatically set to the same position when
operated the next time.
• The adjustment range is narrower the SWING
range in order to prevent condensation from drip-
ping.
CAUTION:
Never attempt to adjust the louvres manually.
• Manual adjustment of the louvres can cause the
unit to malfunction.
• When the vertical airfl ow louvre is positioned at
the lowest position in the COOL or DRY mode for
an extended period of time, condensation may re-
sult.
GB-7
Press the SWING button(
• The horizontal airfl ow louvres will swing.
Press the SWING button(
when the horizontal airfl ow louvres are
at the desired position.
).
) again
1
2