Plasmacluster Operation; Self Clean Operation - Sharp Plasmacluster AE-Z40KR Operation Manual

PLASMACLUSTER OPERATION

Plasmacluster ions released into the room will
reduce some airborne mold.
1
During operation, press the
PLASMACLUSTER button.
• The remote control will display "
• The blue PLASMACLUSTER lamp on the
unit will light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The PLASMACLUSTER lamp on the unit will turn
off.
NOTE:
• Use of the PLASMACLUSTER operation will be
memorized, and it will be activated the next time
you turn on the unit.
• To turn off the PLASMACLUSTER lamp, press
the DISPLAY button.
• To perform Plasmacluster operation in FAN only
mode, press the PLASMACLUSTER button when
the unit is not operating.
The mode symbol of the remote control will go off
and the fan speed cannot be set to AUTO.
SELF CLEAN operation will reduce the growth
mold fungus with Plasmacluster ions and
dry inside of the unit. Utilize the operation at
seasonal change over terms.
1
".
1
TO CANCEL
Press the SELF CLEAN button.
• The blue PLASMACLUSTER lamp on the unit will
NOTE:
• You cannot set the temperature, fan speed, air
• Mold fungus already grown can not be eliminated
GB-12

SELF CLEAN OPERATION

Press the SELF CLEAN button when
the unit is not operating.
• The remote control displays "
• The blue PLASMACLUSTER lamp on the unit
will light up.
• The unit will stop operation after 40 minutes.
turn off.
fl ow direction or timer setting during the SELF
CLEAN operation.
by this operation.
".
1