Plasmacluster Operation; Self Clean Operation - Sharp Plasmacluster AE-X30EJ Operation Manual

PLASMACLUSTER OPERATION

You can choose AIR CLEAN OPERATION or ION BALANCE OPERATION
DISPLAY
NOTES:
• Setting of the PLASMACLUSTER operation will be memorized and will operate in the same
mode, the next time you turn on the air conditioner.
• To turn off the PLASMACLUSTER lamp, press the DISPLAY button.
• When the PLASMACLUSTER button is pressed while the unit is not operating, the
PLASMACLUSTER operation will be performed without accompanying air conditioning mode
(eg, HEATING or COOLING). The mode symbol of the remote control will go off and the fan
speed can not be set AUTO.

SELF CLEAN OPERATION

MODE
1h
CLEAN
FAN
NOTE
:
• You cannot set the temperature, fan speed, air flow direction or timer setting during the SELF
CLEAN operation.
1
During operation, press the PLASMACLUSTER
button to select the mode.
REMOTE CONTROL
DISPLAY
PLASMACLUSTER
lamp on the unit
• In the AIR CLEAN operation, the blue PLASMACLUSTER
lamp on the unit will light up.
1
• In the ION BALANCE operation, the green
PLASMACLUSTER lamp on the unit will light up.
TO CANCEL
Press the PLASMACLUSTER button until
PLASMACLUSTER symbol on the remote control
display goes off.
• The PLASMACLUSTER lamp on the unit will turn off.
1
Press the SELF CLEAN button when the unit is not
operating.
• The remote control displays "
• The red OPERATION lamp (
CLEAN lamp (
lamp on the unit will light up.
• The unit will stop operation after forty minutes.
TO CANCEL
Press the SELF CLEAN button.
1
Or, turn the unit off by pressing the ON/OFF button.
• The red OPERATION lamp (
CLEAN lamp (
lamp on the unit will turn off.
13
AIR CLEAN ION BALANCE
GREEN lamp lights up
BLUE lamp lights up
".
), the green SELF
) and the blue PLASMACLUSTER
), the green SELF
) and the blue PLASMACLUSTER
CANCEL
Lamp goes off