JVC KD-R601 Instructions Manual page 37

Symptoms
• Disc cannot be played back.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be
skipped.
• Disc can neither be played back nor
ejected.
• Disc sound is sometimes interrupted.
• "NO DISC" appears on the display.
• "PLEASE" and "EJECT" appear alternately
on the display.
• Disc cannot be played back.
• Noise is generated.
• A longer readout time is required
("READING" keeps flashing on the
display).
• Tracks do not play back in the order you
have intended them to play.
• The elapsed playing time is not correct.
• "NO FILE" appears on the display.
• "NOT SUPPORT" appears on the display
and track skips.
• The correct characters are not displayed
(e.g. album name).
*
1 Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA track.
Remedies/Causes
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which
you used for recording.
• Unlock the disc (see page 12).
• Eject the disc forcibly (see page 3).
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Insert a playable disc into the loading slot.
0
Press , then insert a disc correctly.
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)
Do not use too many hierarchical levels and folders.
The playback order is determined when the files are
recorded.
This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
Selected folder is an empty folder *
that contains MP3/WMA tracks.
Check whether the track is a playable file format.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
. Select another folder
1
Continued on the next page
REFERENCES 37