JVC KD-R601 Instructions Manual

JVC KD-R601 Instructions Manual

Cd receiver
Hide thumbs Also See for KD-R601:
Table of Contents

Advertisement

Available languages

Available languages

Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Vous avez des PROBLÈMES de fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
Dear Customer,
This apparatus is in conformance with the valid European
directives and standards regarding electromagnetic
compatibility and electrical safety.
European representative of Victor Company of Japan, Limited
is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
EN, FR
© 2008 Victor Company of Japan, Limited
Cher(e) client(e),
Cet appareil est conforme aux directives et normes
européennes en vigueur concernant la compatibilité
électromagnétique et à la sécurité électrique.
Représentant européen de la société Victor Company of Japan,
Limited:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Allemagne
1208DTSMDTJEIN
CD RECEIVER
RÉCEPTEUR CD
KD-R601
For canceling the display demonstration, see page 8.
Pour annuler la démonstration des affichages, référez-vous à la page 8.
For installation and connections, refer to the separate manual.
Pour l'installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUEL D'INSTRUCTIONS
GET0581-003A
[EX/EU]

Advertisement

Table of Contents
loading

Summary of Contents for JVC KD-R601

  • Page 1 électromagnétique et à la sécurité électrique. European representative of Victor Company of Japan, Limited Représentant européen de la société Victor Company of Japan, Limited: JVC Technical Services Europe GmbH JVC Technical Services Europe GmbH Postfach 10 05 04 Postfach 10 05 04...
  • Page 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
  • Page 3: Table Of Contents

    CONTENTS Detaching the control panel Detaching the control panel ......3 Attaching the control panel ......3 How to reset your unit ......... 3 How to forcibly eject a disc ......3 OPERATIONS Basic operations ........... 4 • Using the control panel ....... •...
  • Page 4: Basic Operations

    Basic operations Using the control panel USB (Universal Serial Bus) input jack • DAB: Select DAB service. Detach the panel. • CD/USB/CD-CH: Select folder. • FM/AM: Search for station. • IPOD: Enter the main menu/Pause playback/ • DAB: Search for DAB ensemble. Confirm selection.
  • Page 5 Also known as “Control dial” in this manual. You cannot select these sources if they are not ready or not connected. When connecting the iPod/iPhone to the USB input jack for the first time, “USB” appears on the display first, then “USB-IPOD.”...
  • Page 6: Using The Remote Controller (Rm-Rk50)

    Using the remote controller (RM-RK50) • Turns the power on if pressed briefly or Installing the lithium coin battery (CR2025) attenuates the sound when the power is on. • Turns the power off if pressed and held. • Changes the FM/AM/DAB preset stations. •...
  • Page 7 Warning (to prevent accidents and damage): • Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire. • Do not install any battery other than CR2025 or its • Do not leave the battery with other metallic equivalent.
  • Page 8: Preparation

    Preparation Canceling the display demonstration and setting the clock • See also page 27. Turn on the power. Cancel the display demonstrations Select “DEMO,” then “DEMO OFF.” Press and hold until the Set the clock main menu is called up. “CLOCK SET.”...
  • Page 9: Storing Stations In Memory

    Improving the FM reception Storing stations in memory When an FM stereo broadcast is hard to receive, Automatic presetting (FM)— SSM (Strong- activate monaural mode for better reception. station Sequential Memory) • See also page 28. You can preset up to 18 stations for FM. While listening to a station...
  • Page 10: Using The Standby Receptions

    Manual presetting (FM/AM) The following features are available only for FM You can preset up to 18 stations for FM and 6 stations Radio Data System stations. for AM. Ex.: Storing FM station of 92.50 MHz into preset Searching for FM Radio Data number “04.”...
  • Page 11 To activate TA Standby Reception Tracing the same programme— The TP (Traffic Programme) Network-Tracking Reception indicator either lights up or flashes. When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to • If the TP indicator lights up, TA Standby Reception is another FM Radio Data System station of the same activated.
  • Page 12: Disc/Usb Operations

    Disc/USB operations Playing a disc Turn on the power. Insert a disc. All tracks will be played repeatedly until you change the source or eject the disc. Stop playing and ejecting the disc Prohibiting disc ejection • “NO DISC” appears. Press SRC to listen to another playback source.
  • Page 13: Disc/File Operations

    If a USB device has been attached... Disc/file operations Selecting a track/folder Playback starts from where it has been stopped previously. • If a different USB device is currently attached, playback starts from the beginning. Stop playing and detaching the USB device [Turn] [Press] Straightly pull it out from the unit.
  • Page 14: Using The Bluetooth® Devices

    Selecting the playback modes Using the Bluetooth ® You can use only one of the following playback modes devices at a time. For Bluetooth operations, it is required to connect the Bluetooth adapter (KS-BTA200) (not supplied) to the CD changer jack on the rear of this unit. •...
  • Page 15 Registering using “OPEN” Use the Bluetooth device to search and connect. Preparation: Operate the device to turn on its On the device to be connected, enter the same Bluetooth function. PIN code you have just entered for this unit. Select “BT-PHONE” or “BT-AUDIO.” “CONNECTED”...
  • Page 16: Using The Bluetooth Cellular Phone

    29 for setting). If the cellular phone is compatible with SMS (Short When “AUTO ANSWER” is activated..Message Service) (notified through JVC Bluetooth The unit answers the incoming calls automatically, see adapter) and “MSG INFO” (message info) is set to page 26.
  • Page 17: Making A Call

    Making a call Direct dialing: Select “NUMBER.” You can make a call using the following methods. Select “BT-PHONE,” then follow the following steps to make a call: • To return to the previous menu, press Select a number. Enter the “DIAL” menu. Select a calling method.
  • Page 18: Using The Bluetooth Audio Player

    Enter the Bluetooth menu (see page 26) Bluetooth Information: If you wish to receive more information about * Operation may be different according to the connected Bluetooth, visit the following JVC web site: Bluetooth audio player. <http://www.jvc.co.jp/english/car/> (English website only)
  • Page 19: Listening To The Cd Changer

    Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer (not supplied) with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs.
  • Page 20: Listening To The Ipod/Iphone

    Listening to the iPod/iPhone You can connect the iPod/iPhone using the following cable or adapter: Cable/adapter To operate USB 2.0 cable (supplied with the iPod/iPhone) to the See “When connected with the USB cable” below. USB input jack on the control panel Interface adapter for iPod, KS-PD100 (not supplied) to See “When connected with the interface adapter”...
  • Page 21: Selecting The Playback Modes

    Selecting a track from the menu Selecting the playback modes Enter the main menu. Select the desired menu. [Turn] [Press] [Turn] [Press] Ô REPEAT RANDOM Ô Ô Ô PLAYLISTS ARTISTS ALBUMS [Turn] [Press] Ô Ô Ô SONGS PODCASTS GENRES Ô COMPOSERS AUDIOBOOKS ONE RPT...
  • Page 22: When Connected With The Interface Adapter

    When connected with the interface adapter Preparation: Make sure “CH/IPOD” is selected in the “SRC SELECT” “EXT IN” setting, see page 30. Select “IPOD.” Playback starts automatically. Select a song. Pressing (or holding) the following buttons allows you Selecting a track from the menu to...
  • Page 23: Listening To The Dab Tuner

    Listening to the DAB tuner Before operating, connect the JVC DAB tuner, KT-DB1000 (not supplied) to the CD changer jack on the rear of the unit. Preparation: Make sure “CH/IPOD” is selected in the “SRC SELECT” “EXT IN” setting, see page 30.
  • Page 24: Listening To The Other External Components

    Listening to the other external components You can connect an external component to: • EXT INPUT: CD changer jack on the rear of this unit using the following adapters (not supplied): – KS-U57: For connecting the component with pin jacks –...
  • Page 25: Settings

    Selecting a preset sound mode You can select a preset sound mode suitable to the music genre. • See also page 27. [Turn] [Press] • See the following for “USER” settings. Storing your own sound mode Adjust the sound elements of the selected tone.
  • Page 26: Bluetooth Settings

    Appears only when a Bluetooth phone is arrival of a message. connected and it is compatible with text message (notified through JVC Bluetooth adapter). MIC SETTING (microphone setting) Bluetooth Audio: Shows only “Version.” Only for the device being connected for “BT-PHONE.”...
  • Page 27: Menu Operations

    Menu operations Repeat step 2 if necessary. Call up the menu. Select the desired item. • To return to the previous menu, press BACK. [Turn] [Press] • To exit from the menu, press DISP or MENU. Initial: Underlined Category Menu items Selectable settings, [reference page] DEMO •...
  • Page 28 Category Menu items Selectable settings, [reference page] TAG DISPLAY • TAG ON : Shows the Tag information while playing MP3/WMA Tag display tracks. • TAG OFF : Cancels. AF-REG * • AF ON : When the currently received signals become weak, the Alternative unit switches to another station (the programme may frequency/...
  • Page 29 Category Menu items Selectable settings, [reference page] MENU COLOR • ON : Changes the display and button (except EQ/ Menu color illumination during menu, list search and playback mode operations. • OFF : Cancels. RING COLOR * • ON : When a call comes in, the display will flash in blue. Ring color •...
  • Page 30 • AM OFF : Disable “AM” in source selection. EXT IN * • CH/IPOD : To use a JVC CD changer, [19], JVC DAB tuner, [23], or an External input Apple iPod/iPhone, [20]. • EXT INPUT : To listen to a portable audio player (connected to the CD changer jack), [24].
  • Page 31: Color Settings

    Color settings Selecting a preset color You can select a preset color for the buttons and display. [Turn] [Press] • See also page 28. Select a primary color. [Turn] [Press] Creating your own color —USER Color You can create your own colors—“DAY COLOR” or Adjust the level (00 to 31) of the selected “NIGHT COLOR.”...
  • Page 32: More About This Unit

    More about this unit FM Radio Data System operations Basic operations • Network-Tracking Reception requires two types Turning on the power of Radio Data System signals—PI (Programme • By pressing SRC button on the unit, you can also turn Identification) and AF (Alternative Frequency) on the power.
  • Page 33 Playing a CD-R or CD-RW • This unit can play back MP3/WMA files meeting the conditions below: • Use only “finalized” CD-Rs or CD-RWs. – Bit rate of MP3/WMA: 32 kbps — 320 kbps • This unit can only play back files of the same type as –...
  • Page 34: Bluetooth Operations

    Playing MP3/WMA tracks from a USB device • This unit may not play back files in a USB device properly when using a USB extension cord. • While playing from a USB device, the playback order • This unit cannot play back the following files: may differ from other players.
  • Page 35 – iPod with Click Wheel (4th Generation) “VOLUME 30.” – iPod mini – iPod photo JVC bears no responsibility for any loss of data – iPod with video (5th Generation) * in an iPod/iPhone and/or USB mass storage – iPod classic * class device while using this System.
  • Page 36: Troubleshooting

    Preset value setting for each sound mode Preset value Sound BASS MIDDLE TREBLE LOUD mode (loudness) Freq. Level Freq. Level Freq. Level USER 60 Hz 00 Q1.25 1.0 kHz Q1.0 10.0 kHz — ROCK 100 Hz Q1.0 1.0 kHz 00 Q1.25 10.0 kHz —...
  • Page 37 Symptoms Remedies/Causes • Disc cannot be played back. Insert the disc correctly. • CD-R/CD-RW cannot be played back. • Insert a finalized CD-R/CD-RW. • Tracks on the CD-R/CD-RW cannot be • Finalize the CD-R/CD-RW with the component which skipped. you used for recording. •...
  • Page 38 Symptoms Remedies/Causes • Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • “READING” keeps flashing on the display. • Readout time varies depending on the USB device. •...
  • Page 39 Symptoms Remedies/Causes • The unit does not make pairing with the • Enter the same PIN code for both the unit and target Bluetooth device. device. • Select the device name from “SPECIAL,” then try to connect again. (See page 15.) •...
  • Page 40 • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective owners.
  • Page 41: Maintenance

    Maintenance How to clean the connectors To keep discs clean Frequent detachment will deteriorate the connectors. A dirty disc may not play correctly. To minimize this possibility, periodically wipe the If a disc does become dirty, wipe it with connectors with a cotton swab or cloth moistened with a soft cloth in a straight line from center alcohol, being careful not to damage the connectors.
  • Page 42: Specifications

    Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω...
  • Page 43 CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max.
  • Page 44 Merci pour avoir acheté un produit JVC. Veuillez lire attentivement toutes les instructions avant d’utiliser l’appareil afin de bien comprendre son fonctionnement et d’obtenir les meilleures performances possibles. IMPORTANT POUR PRODUITS LASER 1. PRODUIT LASER CLASSE 1 2. ATTENTION: N’ouvrez pas le couvercle supérieur. Il n’y a aucune pièce réparable par l’utilisateur à l’intérieur de l’appareil;...
  • Page 45: Retrait Du Panneau De Commande

    TABLE DES MATIERES Retrait du panneau de commande Retrait du panneau de commande ....3 Fixation du panneau de commande ..... 3 Comment réinitialiser votre appareil ... 3 Comment forcer l’éjection d’un disque ..3 FONCTIONNEMENT Opérations de base ........4 •...
  • Page 46: Opérations De Base

    Opérations de base Utilisation du panneau de commande Prise d’entrée USB (bus série universel) • DAB: Choisissez un service DAB. Retrait du panneau. • CD/USB/CD-CH: Sélection d’un dossier. • FM/AM: Recherchez une station. • IPOD: Accès au menu principal/Pause de la •...
  • Page 47 Appelée aussi “Molette de commande” dans ce manuel. Vous ne pouvez pas choisir ces sources si elles ne sont pas prêtes ou connectées. Lors de la connexion du iPod/iPhone à la prise d’entrée USB pour la première fois, “USB” apparaît d’abord sur l’affiche, puis c’est le tour de “USB-IPOD”.
  • Page 48: Utilisation De La Télécommande (Rm-Rk50)

    Utilisation de la télécommande (RM-RK50) • Appuyez brièvement sur cette touche pour Mise en place de la pile-bouton au lithium mettre l’appareil sous tension ou atténuer le son (CR2025) si l’appareil est déjà sous tension. • Maintenez cette touche pressée pour mettre l’appareil hors tension.
  • Page 49 Avertissement (pour éviter tout accident et • Ne rechargez pas, ne court-circuitez pas, ne chauffez pas la pile ni ne la jeter dans un feu. tout dommage): • Ne laissez pas la pile avec d’autres objets métalliques. • N’installez pas une autre pile qu’une CR2025 ou son •...
  • Page 50: Préparation

    Préparation Annulation de la démonstration des affichages et réglage de l’horloge • Référez-vous aussi à la page 27. Mise sous tension de l’appareil. Annulez de la démonstration des affichages Choisissez “DEMO”, puis “DEMO OFF”. Réglez l’horloge Maintenez la touche pressée jusqu’à...
  • Page 51 Amélioration de la réception FM Mémorisation des stations Quand une émission FM stéréo est difficile à recevoir, Préréglage automatique (FM)—SSM mettez en service le mode monaural pour améliorer la (mémorisation automatique séquentielle réception. des stations puissantes) • Référez-vous aussi à la page 28. Vous pouvez prérégler un maximum de 18 stations pour FM.
  • Page 52 Préglage manuel (FM/AM) Les fonctionnalités suivantes sont accessibles Vous pouvez prérégler un maximum de 18 stations pour uniquement pour les stations FM Radio Data System. FM et de 6 stations pour AM. Ex.: Mémorisation de la station FM de fréquence 92,50 Recherche d’un programme FM MHz sur le numéro de préréglage “04”.
  • Page 53 Pour mettre en service l’attente de réception TA Poursuite du même programme— L’indicateur TP (programme Poursuite de réception en réseau d’informations routières) s’allume Lorsque vous conduisez dans une région où la réception ou clignote. FM n’est pas suffisamment forte, cet autoradio accorde automatiquement une autre station FM Radio Data •...
  • Page 54: Disque/Usb

    Disque/USB Lecture d’un disque Mise sous tension de l’appareil. Insérez un disque Toutes les plages sont reproduites répétitivement jusqu’à ce que vous changiez la source ou éjectiez le disque. Arrête la lecture et éjecte le disque. Interdiction de l’éjection du disque •...
  • Page 55: Opérations Des Disques/Fichiers

    Si un périphérique USB est connecté... Opérations des disques/fichiers Sélection d’une plage/dossier La lecture démarre à partir de l’endroit où elle a été interrompue la dernière fois. • Si un périphérique USB différent est actuellement connecté à l’appareil, la lecture démarre à partir du début.
  • Page 56: Utilisation D'appareil Bluetooth

    Sélection des modes de lecture Utilisation d’appareil Vous pouvez utiliser un des modes de lecture suivants Bluetooth ® à la fois. Pour les opérations Bluetooth, il faut connecter l’adaptateur Bluetooth (KS-BTA200) (non fournie) à la prise de changeur de CD à l’arrière de cet appareil. •...
  • Page 57 Enregistrement en utilisant “OPEN” Utilisez le périphérique Bluetooth pour faire la recherche et réaliser la connexion. Préparation: Réglez le périphérique pour mettre en Sur le périphérique à connecter, entrez le même service la fonction Bluetooth. code PIN que vous venez juste d’entrer sur cet Choisissez “BT-PHONE”...
  • Page 58: Utilisation D'un Téléphone Portable Bluetooth

    L’appareil répond automatiquement aux appels messages SMS (service de messages courts) (notifiés entrant, voir page 26. par l’adaptateur Bluetooth JVC) et que “MSG INFO” • Quand “AUTO ANSWER” est hors service, appuyez (info messages) est réglé sur “AUTOMATIC” (voir page sur n’importe quelle touche (sauf...
  • Page 59 Pour faire un appel Composition directe: Choisissez “NUMBER”. Vous pouvez faire un appel en utilisant les méthodes suivantes. Choisissez “BT-PHONE”, puis suivez les étapes suivantes pour faire un appel: Choisissez un nombre. • Pour revenir au menu précédent, appuyez sur Affichez le menu “DIAL”.
  • Page 60: Utilisation D'un Lecteur Audio Bluetooth

    26) * L’opération peut différer en fonction du lecteur audio Informations sur le système Bluetooth: Bluetooth connecté. Si vous souhaitez recevoir plus d’informations sur le système Bluetooth, consultez le site web de JVC suivant: <http://www.jvc.co.jp/english/car/> (Site web en anglais uniquement)
  • Page 61: Écoute Du Changeur De Cd

    Écoute du changeur de CD Il est recommandé d’utiliser un changeur de CD JVC compatible MP3 (non fournie) avec votre autoradio. Vous pouvez connecter un changeur de CD à la prise de changeur de CD à l’arrière de l’appareil. • Vous pouvez uniquement reproduire les CD ordinaire (y compris les CD Text) et les disques MP3.
  • Page 62: Écoute De Ipod/Iphone

    Écoute de iPod/iPhone Vous pouvez connecter le iPod/iPhone en utilisant le câble ou l’adaptateur suivant : Câble/adaptateur Pour réaliser l’opération Câble USB 2.0 (fourni avec le iPod/iPhone) à la prise Référez-vous à “Lors de la connexion avec le câble USB” d’entrée USB sur le panneau de commande ci-dessous.
  • Page 63 Sélection d’une plage à partir du Sélection des modes de lecture menu Entrez dans le menu principal. [Tournez] Choisissez le menu souhaité. [Appuyez sur la touche] Ô REPEAT RANDOM [Tournez] [Appuyez sur la touche] [Tournez] Ô Ô Ô [Appuyez sur la touche] PLAYLISTS ARTISTS ALBUMS...
  • Page 64: Lors De La Connexion Avec L'interface L'adaptateur

    Lors de la connexion avec l’adaptateur d’interface Préparation: Assurez-vous que “CH/IPOD” est choisi pour le réglage “SRC SELECT” “EXT IN”, voir page Choisissez “IPOD”. La lecture démarre automatiquement. Sélection d’un morceau. Appuyer ou (maintenir pressées) les touches suivantes Sélection d’une plage à partir du vous permet de...
  • Page 65: Écoute Du Tuner Dab

    Écoute du tuner DAB Avant de commencer, connectez le tuner DAB JVC , KT-DB1000 (non fournie) à la prise du changeur de CD à l’arrière de l’appareil. Préparation: Assurez-vous que “CH/IPOD” est choisi pour le réglage “SRC SELECT” “EXT IN”, voir page Choisissez “DAB”.
  • Page 66: Écoute D'un Autre Appareil Extérieur

    Écoute d’un autre appareil extérieur Vous pouvez connecter un appareil extérieur à: • EXT INPUT: la prise de changeur de CD à l’arrière de cet appareil en utilisant les adaptateurs suivants (non fourni): – KS-U57: Pour connecter l’appareil avec les prises Cinch –...
  • Page 67: Réglages

    Sélection d’un mode sonore préréglé Vous pouvez sélectionner un mode sonore préréglé adapté à votre genre de musique. • Référez-vous aussi à la page 27. [Tournez] [Appuyez sur la touche] • Référez-vous à ce qui suit pour les réglages “USER”. Mémorisation de votre propre Ajustez les éléments sonores de la tonalité...
  • Page 68: Réglages Bluetooth

    Bluetooth est connecté et qu’il est compatible MANUAL: L’appareil ne vous informe pas de avec les messages textuels (notifiés par l’arrivée d’un message. l’adaptateur Bluetooth JVC). Bluetooth Audio: Affiche uniquement “Version”. MIC SETTING (réglage du microphone) Uniquement pour l’appareil connecté pour “BT-PHONE”. Changez le réglage souhaité.
  • Page 69: Utilisation Des Menus

    Utilisation des menus Répéter l’étape 2 si Appelez le menu. Choisissez l’élément souhaité. nécessaire. • Pour revenir au menu précédent, [Tournez] appuyez sur BACK. [Appuyez sur la touche] • Pour quitter le menu, appuyez sur DISP ou MENU. Réglage initial: Souligné Catégorie Articles du menu Réglages pouvant être choisis, [page de référence] DEMO •...
  • Page 70 Catégorie Articles du menu Réglages pouvant être choisis, [page de référence] TAG DISPLAY • TAG ON : Affiche les informations des balises lors de la lecture d’une Affichage des balises plage MP3/WMA. • TAG OFF : Annulation. AF-REG * • AF ON : Quand les signaux actuellement reçus deviennent faibles, Fréquence l’appareil commute sur une autre station (le programme...
  • Page 71 Catégorie Articles du menu Réglages pouvant être choisis, [page de référence] MENU COLOR • ON : Change l’éclairage de l’affichage et des touches (sauf EQ/ Couleur du menu ) pendant le menu, la recherche de liste et les opérations sur le mode de lecture. •...
  • Page 72 : Met hors service “AM” dans la sélection de la source. EXT IN * • CH/IPOD : Pour utiliser un changeur de CD JVC, [19], un tuner DAB Entrée extérieure JVC, [23] ou un iPod/iPhone d’Apple, [20]. • EXT INPUT : Pour écouter un lecteur audio portable (connecté...
  • Page 73: Réglages De La Couleur

    Réglages de la couleur Sélection d’une couleur préréglée [Tournez] Vous pouvez choisir une couleur préréglée pour les [Appuyez sur la touche] touches et l’affichage. • Référez-vous aussi à la page 28. Choisissez une couleur primaire. [Tournez] [Appuyez sur la touche] Création de votre propre couleur —USER Color Vous pouvez créer vos propres couleurs—...
  • Page 74: Pour En Savoir Plus À Propos De Cet Autoradio

    Pour en savoir plus à propos de cet autoradio Utilisation du système FM Radio Data System Opérations de base • La poursuite de réception en réseau nécessite Mise sous tension de l’appareil deux types de signaux Radio Data System—PI • Vous pouvez aussi mettre l’appareil sous tension en (identification du programme) et AF (fréquence appuyant sur la touche SRC.
  • Page 75 Lecture d’un CD-R ou CD-RW • Cet autoradio peut reproduire les fichiers MP3/WMA respectant les conditions suivantes: • Utilisez uniquement des CD-R ou CD-RW “finalisés”. – Débit binaire pour MP3/WMA: 32 kbps — 320 kbps • Cet appareil peut uniquement reproduire les fichiers –...
  • Page 76 Lecteur de plages MP3/WMA à partir d’un • Il se peut que cet appareil ne reconnaisse pas un périphérique USB connecté à travers un lecteur de périphérique USB carte USB. • Lors de la lecture à partir d’un périphérique USB, •...
  • Page 77 – iPod avec molette cliquable (4e Génération) sur “VOLUME 30”. – iPod mini – iPod photo JVC ne peut être tenu responsable pour toute – iPod avec vidéo (5e Génération) * perte de données dans un iPod/iPhone et/ou – iPod classic * un périphérique USB à...
  • Page 78: Guide De Dépannage

    Valeur préréglée pour chaque mode sonore Valeur préréglée Mode BASS MIDDLE TREBLE LOUD sonore (loudness) Fréq. Niveau Fréq. Niveau Fréq. Niveau USER 60 Hz 00 Q1.25 1.0 kHz Q1.0 10.0 kHz — ROCK 100 Hz Q1.0 1.0 kHz 00 Q1.25 10.0 kHz —...
  • Page 79 Symptôme Remèdes/Causes • Le disque ne peut pas être reproduit. Insérez le disque correctement. • Le CD-R/CD-RW ne peut pas être • Insérez un CD-R/CD-RW finalisé. reproduit. • Finalisez le CD-R/CD-RW avec l’appareil que vous avez • Les plages sur les le CD-R/CD-RW ne utilisé...
  • Page 80 Symptôme Remèdes/Causes • Du bruit est produit. La plage reproduite n’est pas une plage MP3/WMA. Passez à un autre fichier. (N’ajoutez pas le code d’extension <.mp3> ou <.wma> à des plages non MP3 ou WMA). • “READING” continue de clignoter sur •...
  • Page 81 Symptôme Remèdes/Causes • L’appareil ne réalise pas le pairage avec le • Entrez le même code PIN pour cet appareil et le périphérique Bluetooth. périphérique cible. • Choisissez le nom du périphérique à partir de “SPECIAL”, puis essayez de nouveau la connexion. (Voir page 15.) •...
  • Page 82 • La marque du mot et les logos Bluetooth sont la propriété de Bluetooth SIG, Inc. et toute utilisation de ces marques par Victor Company of Japan, Limited (JVC) est faite sous licence. Les autres marques et noms de commerce sont la propriété...
  • Page 83: Entretien

    Entretien Comment nettoyer les connecteurs Pour garder les disques propres Un détachement fréquent détériorera les connecteurs. Si le disque est sale, sa lecture risque Pour minimiser ce problème, frottez périodiquement les d’être déformée. connecteurs avec un coton tige ou un chiffon imprégné Si un disque est sale, essuyez-le avec un d’alcool, en faisant attention de ne pas endommager chiffon doux, en ligne droite du centre...
  • Page 84: Spécifications

    Spécifications SECTION DE L’AMPLIFICATEUR AUDIO Puissance de sortie maximum: Avant/Arrière: 50 W par canal Puissance de sortie en mode continu (RMS): Avant/Arrière: 19 W par canal pour 4 Ω, 40 Hz à 20 000 Hz avec moins de 0,8% de distorsion harmonique totale.
  • Page 85 SECTION DU LECTEUR CD Type: Lecteur de disque compact Système de détection du signal: Capteur optique sans contact (laser semi- conducteur) Nombre de canaux: 2 canaux (stéréo) Réponse en fréquence: 5 Hz à 20 000 Hz Plage dynamique: 96 dB Rapport signal sur bruit: 98 dB Pleurage et scintillement:...

Table of Contents