JVC KD-R611 Instructions For The Use And Care And Installation

JVC KD-R611 Instructions For The Use And Care And Installation

Cd receiver
Hide thumbs Also See for KD-R611:

Advertisement

Available languages

Available languages

Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Vous avez des PROBLÈMES de fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
Dear Customer,
This apparatus is in conformance with the valid
European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of Victor Company of
Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
EN, FR
© 2009 Victor Company of Japan, Limited
Cher(e) client(e),
Cet appareil est conforme aux directives et normes
européennes en vigueur concernant la compatibilité
électromagnétique et à la sécurité électrique.
Représentant européen de la société Victor
Company of Japan, Limited:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Allemagne
1209DTSMDTJEIN
KD-R611
CD RECEIVER / RÉCEPTEUR CD
For canceling the display demonstration, see page 4. / Pour annuler la démonstration des
affichages, référez-vous à la page 4.
For installation and connections, refer to the separate manual. / Pour l'installation et les
raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUEL D'INSTRUCTIONS
ENGLISH
FRANÇAIS
GET0640-003A
[E/EU]

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KD-R611 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for JVC KD-R611

  • Page 1 électromagnétique et à la sécurité électrique. European representative of Victor Company of Représentant européen de la société Victor Japan, Limited is: Company of Japan, Limited: JVC Technical Services Europe GmbH JVC Technical Services Europe GmbH Postfach 10 05 04 Postfach 10 05 04 61145 Friedberg...
  • Page 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
  • Page 3: Table Of Contents

    How to read this manual CONTENTS The following icons/symbols are used to How to read this manual indicate: How to attach/detach the control Press and hold the button(s) panel [Hold] until the desired operation How to reset your unit begins. How to forcibly eject a disc Canceling the display Turn the control dial.
  • Page 4: Canceling The Display Demonstration

    Canceling the display demonstration Turn on the power. Select <DEMO OFF>. [Hold] (Initial setting) Finish the procedure. Setting the clock Turn on the power. Adjust the minute. [Hold] (Initial setting) Select <CLOCK>. Select <24H/12H>. Select <CLOCK SET>. Select <24 HOUR> or <12 HOUR>.
  • Page 5: Preparing The Remote Controller (Rm-Rk50)

    This unit is equipped with the steering wheel remote control function. Caution: Before operating, connect a JVC's OE remote • Danger of explosion if battery is incorrectly adapter (not supplied) which matches your car replaced. Replace only with the same or to the steering wheel remote input terminal on equivalent type.
  • Page 6: Basic Operations

    Basic operations Ejects the disc Display window Loading slot USB (Universal Serial Bus) input jack Control dial Auxiliary input jack Detaches the panel Remote sensor • DO NOT expose to bright sunlight. When you press or hold the following button(s)... Remote Main unit General operation...
  • Page 7: Listening To The Radio

    Remote Main unit General operation controller • Enters <COLOR> setting directly ( 28). — • Enters <COLOR SETUP> setting directly ( 29) if pressed and held. • Activates/deactivates TA Standby Reception. — • Enters PTY Searching mode if pressed and held. •...
  • Page 8: Using The Remote Controller

    Manual presetting (FM/AM) The following features are available You can preset up to 18 stations for FM and 6 only for FM Radio Data System stations. stations for AM. Searching for your favourite Ex.: Storing FM station of 92.50 MHz into preset FM Radio Data System number “04.”...
  • Page 9 Standby receptions Tracing the same programme— Network-Tracking Reception TA Standby Reception When driving in an area where FM reception is TA Standby Reception allows the unit to switch not sufficient enough, this unit automatically temporarily to Traffic Announcement (TA) from tunes in to another FM Radio Data System any source other than AM.
  • Page 10: Listening To A Disc

    Listening to a disc Ÿ ] Turn on the power. All tracks will be played repeatedly until you change the source or eject the disc. Stopping playback and ejecting Caution on volume setting: Discs produce very little noise compared with the disc other sources.
  • Page 11: Listening To The Usb Device

    Changing the display information Using the remote controller 5 U / D ∞ : Selects folder of the MP3/WMA 2 R / F 3 : Selects track Disc title/Album name/performer (folder 2 R / F 3 name)* = Track title (file name)* = Current : Fast-forwards or [Hold] reverses the track...
  • Page 12: Usb Device

    Stop playing and detaching the • This unit may not be able to play the files depending on the type of USB device. USB device • Operation and power supply may not work as Straightly pull it out from the unit. intended for some USB devices.
  • Page 13 Registering using “OPEN” Registering using “SEARCH”/“SPECIAL” Preparation: Operate the device to turn on its Bluetooth function. ] “BT-PHONE” or “BT-AUDIO” ] “BT-PHONE” or “BT-AUDIO” ] “NEW DEVICE” ] “NEW DEVICE” ] “OPEN” ] “SEARCH” : To search for available ] Enter a PIN (Personal Identification devices The unit searches and displays the list Number) code in to the unit.
  • Page 14: Connecting/Disconnecting/Deleting Registered Device

    / SOURCE / connect/disconnect/delete. When a text message comes in..If the mobile phone is compatible with text message (notified through JVC Bluetooth ] “CONNECT” or “DISCONNECT” : To adapter) and “MSG INFO” (message info) is connect/disconnect the selected device set to “AUTOMATIC”...
  • Page 15: Using A Bluetooth Audio Player

    Using a Bluetooth audio player ] Select a calling method. PHONE BOOK* j MISSED* j NUMBER j VOICE DIAL j REDIAL* j RECEIVED* j (back to ] “BT-AUDIO” the beginning) * Displays only when your mobile phone If playback does not start, operate the is equipped with these functions and is Bluetooth audio player to start playback.
  • Page 16: Changing The Bluetooth Settings

    “BT-PHONE.” Adjust microphone volume connected to the Bluetooth adapter, Bluetooth Information: [LEVEL 01/02/03]. If you wish to receive more information about Bluetooth, visit the following JVC web VERSION site: <http://www.jvc.co.jp/english/car/> The Bluetooth software and hardware versions (English website only) are shown.
  • Page 17: Listening To The Ipod/Iphone

    Warning messages ERROR CNNCT (Error Connection) PLEASE WAIT The device is registered but the connection The unit is preparing to use the Bluetooth has failed. Use “CONNECT” to connect the function. If the message does not disappear, device again. ( turn off and turn on the unit, then connect ERROR the device again (or reset the unit).
  • Page 18 There are two control terminals: Selecting a track from the menu • <HEAD MODE> Control by this unit. • <IPOD MODE> Control by the connected iPod/iPhone. Preparation: Select the controlling terminal, <HEAD MODE> or <IPOD MODE> for iPod playback: • Press and hold T/P BACK button. ] Select the desired menu.
  • Page 19: Listening To The Dab Tuner

    T/P BACK. Listening to the DAB tuner Before operating, connect the JVC DAB tuner, KT-DB1000 (not supplied) to the expansion port on the rear of the unit. Preparation: Make sure <EXT ON> is selected in the <SRC SELECT> = <EXT IN> setting. ( •...
  • Page 20: Storing Dab Services In Memory

    Changing the display information Manual search for an ensemble Service name = Ensemble “M” flashes, then press name = Channel number = the button repeatedly. Frequency = Clock = (back to [Hold] the beginning) Storing DAB services in memory Using the remote controller You can preset six DAB services (primary).
  • Page 21: Listening To The Other External Components

    Listening to the other external components You can connect an external component to: • EXT INPUT: Expansion port on the rear of this unit using the following adapters (not ] “EXT INPUT” or “AUX IN” supplied): Ÿ – KS-U57, Line Input Adapter Turn on the connected –...
  • Page 22: Selecting A Preset Sound Mode

    Selecting a preset sound mode You can select a preset sound mode suitable Storing your own sound mode for the music genre. You can store your own adjustments in memory. [Hold] FLAT = NATURAL = DYNAMIC = VOCAL BOOST = BASS BOOST = USER = (back to the beginning) While listening, you can adjust the tone level of ] <PRO EQ>...
  • Page 23: Menu Operations

    Menu operations Repeat step 2 if necessary. [Hold] • To return to the previous menu, press T/P BACK. • To exit from the menu, press DISP or MENU. Category Menu item Selectable setting, [ Initial: Underlined DEMO • DEMO ON : Display demonstration will be activated Display automatically if no operation is done for about...
  • Page 24 Category Menu item Selectable setting, [ Initial: Underlined SCROLL * • SCROLL ONCE : Scrolls the displayed information once. • SCROLL AUTO : Repeats scrolling (at 5-second intervals). • SCROLL OFF : Cancels. Pressing DISP for more than one second can scroll the display regardless of the setting.
  • Page 25 Category Menu item Selectable setting, [ Initial: Underlined DAB AF * • AF ON : Traces the programme among DAB services Alternative and FM Radio Data System stations. ( frequency • AF OFF : Cancels. reception MONO * • MONO ON : Activate monaural mode to improve FM Monaural mode reception, but stereo effect will be lost.
  • Page 26 Category Menu item Selectable setting, [ Initial: Underlined FADER * R06 – F06 : Adjust the front and rear speaker output [00] balance. BALANCE * L06 – R06 : Adjust the left and right speaker output [00] balance. LOUD • LOUD ON : Boost low and high frequencies to produce a Loudness well-balanced sound at a low volume level.
  • Page 27 Category Menu item Selectable setting, [ Initial: Underlined BEEP • BEEP ON : Activates the keypress tone. Keytouch tone • BEEP OFF : Deactivates the keypress tone. TEL MUTING • MUTING 1/ : Select either one which mutes the sounds Telephone MUTING 2 while using a mobile phone.
  • Page 28 Selecting the variable buttons and display color illumination You can select your preferred color for buttons illumination (except for EQ/BASS-TRE / DISP ) and display color separately. Button zone Display zone All zone Repeat steps 2 and 3 to select a [Hold] different zone and your preferred color.
  • Page 29 Creating your own day and night colors—USER You can create your own colors for <DAY COLOR> and <NIGHT COLOR> to apply to button zone and display zone. • <DAY COLOR> Displayed when <DIMMER> is set to <DIMMER OFF>. • <NIGHT COLOR> Displayed when <DIMMER> is set to <DIMMER ON>. Menu hierarchy Operation •...
  • Page 30: More About This Unit

    More about this unit Basic operations Disc/USB operations General Caution for DualDisc playback • If you turn off the power while listening to • The Non-DVD side of a “DualDisc” does not a track, playback will start from where it had comply with the “Compact Disc Digital Audio”...
  • Page 31 Playing a CD-R or CD-RW • This unit can play back MP3/WMA files meeting the conditions below: • Use only “finalized” CD-Rs or CD-RWs. – Bit rate of MP3/WMA: 32 kbps — 320 kbps • This unit can only play back files of the same –...
  • Page 32: Bluetooth Operations

    Playing MP3/WMA tracks from a USB • USB devices equipped with special functions such as data security functions cannot be device used with the unit. • While playing from a USB device, the playback • Do not use a USB device with 2 or more order may differ from other players.
  • Page 33: Dab Operations

    – iPod nano (2nd Generation) – iPod nano (3rd Generation) * – iPod nano (4th Generation) * JVC bears no responsibility for any loss of data – iPod nano (5th Generation) * in an iPod/iPhone and/or USB mass storage – iPod touch * class device while using this System.
  • Page 34: Maintenance

    Maintenance How to clean the connectors To keep discs clean Frequent detachment will deteriorate the A dirty disc may not play connectors. correctly. If a disc does become To minimize this possibility, periodically wipe dirty, wipe it with a soft cloth the connectors with a cotton swab or cloth in a straight line from center to moistened with alcohol, being careful not to...
  • Page 35: Troubleshooting

    ( If “PROTECT” does not disappear, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. The unit does not work at all.
  • Page 36 Symptom Remedy/Cause Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names.
  • Page 37 Symptom Remedy/Cause Tracks/folders are not played The playback order is determined by the write-in time back in the order you have stamp. The first track/folder written into the USB device intended. will be the first track/folder for playback. • “CANNOT PLAY” flashes on •...
  • Page 38 Symptom Remedy/Cause The sound is interrupted or skipped • Reduce the distance between the unit and the during playback of a Bluetooth audio Bluetooth audio device. device. • Disconnect the device connected for “BT-PHONE.” • Turn off, then turn on the unit. •...
  • Page 39 • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective owners.
  • Page 40: Specifications

    Specifications Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 20 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 1% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)
  • Page 41 Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max.
  • Page 42 Merci pour avoir acheté un produit JVC. Veuillez lire attentivement toutes les instructions avant d’utiliser l’appareil afin de bien comprendre son fonctionnement et d’obtenir les meilleures performances possibles. IMPORTANT POUR PRODUITS LASER 1. PRODUIT LASER CLASSE 1 2. ATTENTION: N’ouvrez pas le couvercle supérieur. Il n’y a aucune pièce réparable par l’utilisateur à...
  • Page 43: Panneau De Commande

    Comment lire ce manuel TABLE DES Les icônes/symboles suivants sont utilisés MATIERES pour indiquer: Comment lire ce manuel Maintenez pressées ces [Maintenez touches jusqu’à ce que Comment attacher/détacher le pressée] l’opération souhaitée panneau de commande démarre. Comment réinitialiser votre appareil Comment forcer l’éjection d’un Tournez la molette de disque...
  • Page 44 Annulation des démonstrations des affichages Mise de l’appareil sous tension. Choisissez <DEMO OFF>. [Maintenez pressée] (Réglage initial) Terminez la procédure. Réglage de l’horloge Mise de l’appareil sous tension. Ajustez les minutes. [Maintenez pressée] (Réglage initial) Choisissez <CLOCK>. Choisissez <24H/12H>. Choisissez <CLOCK SET>. Choisissez <24 HOUR>...
  • Page 45 L’autoradio est muni d’une fonction de télécommande de volant. Avant de commencer, connecter un adaptateur Attention: de télécommande OE JVC (non fourni), • Danger d’explosion si la pile est remplacée de correspondant à votre voiture, à la prise façon incorrecte. Remplacez-la uniquement d’entrée de la télécommande de volant à...
  • Page 46 Opérations de base Prise d’entrée USB Éjection d’un disque Fente d’insertion Fenêtre d’affichage (bus série universel) Molette de commande Prise d’entrée auxiliaire Retrait du panneau Capteur de télécommande • NE l’exposez PAS à la lumière directe du soleil. Quand vous appuyez ou maintenez pressées les touches suivantes... Appareil Télécommande Opérations générales...
  • Page 47: Coute De La Radio

    Appareil Télécommande Opérations générales principal • Entre en mode de réglage <COLOR> directement ( 28). — • Maintenez cette touche pressée pour entrer directement en mode de réglage <COLOR SETUP> ( 29). • Mise en/hors service de l’attente de réception TA. •...
  • Page 48 Préglage manuel (FM/AM) Les fonctionnalités suivantes sont Vous pouvez prérégler un maximum de 18 accessibles uniquement pour les stations pour FM et de 6 stations pour AM. stations FM Radio Data System. Ex.: Mémorisation de la station FM de fréquence Recherche de votre programme 92,50 MHz sur le numéro de préréglage “04”.
  • Page 49 Attente de réception Poursuite du même programme— Poursuite de réception Attente de réception TA en réseau L’attente de réception TA permet à l’appareil de commuter temporairement sur des Lorsque vous conduisez dans une région où la informations routières (TA) à partir de n’importe réception FM n’est pas suffisamment forte, cet quelle source autre que AM.
  • Page 50 Écoute d’un disque Ÿ ] Mise sous tension de l’appareil. Toutes les plages sont reproduites répétitivement jusqu’à ce que vous changiez la source ou éjectiez le disque. Arrête de la lecture et éjection du Précautions sur le réglage du volume: disque Les disques produisent très peut de bruit par rapport aux autres sources.
  • Page 51 Changement des informations sur Utilisation de la télécommande l’affichage 5 U / D ∞ : Choisit un dossier d’un disque MP3/ 2 R / F 3 : Sélection d’une plage Le titre du disque/Nom de l’album/ 2 R / F 3 interprète (nom du dossier)* = Titre de : Avance ou recule [Maintenez...
  • Page 52 Arrêt de la lecture et • Il se peut que cet appareil ne puisse pas lire des fichiers en fonction du type de débranchement du périphérique périphérique USB. • Le fonctionnement et l’alimentation peuvent Tirez en ligne droite pour le détacher le ne pas fonctionner comme prévu pour périphérique.
  • Page 53 Enregistrement en utilisant “OPEN” Enregistrement en utilisant “SEARCH”/“SPECIAL” Préparation: Réglez le périphérique pour mettre en service la fonction Bluetooth. ] “BT-PHONE” ou “BT-AUDIO” ] “BT-PHONE” ou “BT-AUDIO” ] “NEW DEVICE” ] “NEW DEVICE” ] “OPEN” ] “SEARCH” : Pour rechercher les ] Entrez un code PIN (Numéro périphériques disponibles L’appareil recherche et affiche la...
  • Page 54 Quand un message textuel arrive..Si le téléphone portable est compatible avec les messages textuels (notifiés par l’adaptateur ] “CONNECT” ou “DISCONNECT” : Pour Bluetooth JVC) et que “MSG-INFO” (info connecter/déconnecter le périphérique messages) est réglé sur “AUTOMATIC” ( 16), choisi l’appareil sonne pour vous informer de l’arrivée...
  • Page 55: Audio Bluetooth

    Utilisation d’un lecteur audio Bluetooth ] Choisissez une méthode d’appel. PHONE BOOK* j MISSED* j NUMBER j VOICE DIAL j REDIAL* j RECEIVED* j (retour ] “BT-AUDIO” au début) Si la lecture ne démarre pas, utilisez le lecture * Apparaît uniquement quand votre audio Bluetooth pour démarrer la lecture.
  • Page 56 “BT-PHONE”. Ajustez le volume du Si vous souhaitez recevoir plus d’informations microphone connecté à l’adaptateur Bluetooth, sur le système Bluetooth, consultez le site [LEVEL 01/02/03]. web de JVC suivant: <http://www.jvc. co.jp/english/car/> (Site web en anglais VERSION uniquement) Les versions du logiciel et du matériel Bluetooth sont affichées.
  • Page 57 Messages d’avertissement ERROR CNNCT (Erreur de connexion) PLEASE WAIT Le périphérique est enregistré mais L’appareil se prépare pour utiliser la la connexion a échouée. Utilisez fonction Bluetooth. Si le message ne “CONNECT” pour connecter de nouveau le disparaît pas, mettez l’appareil hors tension périphérique.
  • Page 58 Il y a deux prises de commande: Sélection d’une plage à partir du • <HEAD MODE> Commande par cet menu appareil. • <IPOD MODE> Commande par le iPod/ iPhone connecté. Préparation: Choisissez la borne commandée, <HEAD MODE> ou <IPOD MODE> pour la lecture de iPod: •...
  • Page 59 • Pour revenir au menu précédent, appuyez sur T/P BACK. Écoute du tuner DAB Avant de commencer, connectez le tuner DAB JVC, KT-DB1000 (non fourni) au port d’extension à l’arrière de l’appareil. Préparation: Assurez-vous que <EXT ON> est choisi pour le réglage <SRC SELECT> = <EXT IN>.
  • Page 60 Changement des informations sur Recherche manuelle d’un ensemble l’affichage “M” clignote, puis Nom du service = Nom de appuyez sur la touche l’ensemble = Numéro du canal répétitivement. [Maintenez = Fréquence = Horloge = pressée] (retour au début) Mémorisation de services DAB Vous pouvez prérégler 6 services DAB Utilisation de la télécommande (primaires).
  • Page 61 Écoute d’un autre appareil extérieur Vous pouvez connecter un appareil extérieur à: • EXT INPUT: Port d’extension à l’arrière de cet appareil en utilisant les adaptateurs suivants ] “EXT INPUT” ou “AUX IN” (non fournis): Ÿ – Adaptateur d’entrée de ligne, KS-U57 Mettez l’appareil connecté...
  • Page 62 Sélection d’un mode sonore préréglé Vous pouvez sélectionner un mode sonore Mémorisation de votre propre préréglé adapté à votre genre de musique. mode sonore Vous pouvez mémoriser vos propres ajustements en mémoire. FLAT = NATURAL = DYNAMIC = VOCAL BOOST = BASS BOOST = USER = (retour [Maintenez pressée] au début) Pendant l’écoute, vous pouvez ajuster le niveau...
  • Page 63: Utilisation Des Menus

    Utilisation des menus [Maintenez Répéter l’étape 2 si nécessaire. pressée] • Pour revenir au menu précédent, appuyez sur T/P BACK. • Pour quitter le menu, appuyez sur DISP ou MENU. Catégorie Article de menu Réglages pouvant être choisis, [ Réglage initial: Souligné DEMO •...
  • Page 64 Catégorie Article de menu Réglages pouvant être choisis, [ Réglage initial: Souligné SCROLL * • SCROLL ONCE : Fait défiler une fois les informations affichées. • SCROLL AUTO : Répète le défilement (à 5 secondes d’intervalle). • SCROLL OFF : Annulation. Appuyer sur DISP pendant plus d’une seconde peut faire défiler l’affichage quelque que soit le réglage utilisé.
  • Page 65 Catégorie Article de menu Réglages pouvant être choisis, [ Réglage initial: Souligné DAB AF * • AF ON : Poursuit le même programme parmi les Recherche services DAB et les stations FM Radio Data de fréquence System. ( alternative • AF OFF : Annulation.
  • Page 66 Catégorie Article de menu Réglages pouvant être choisis, [ Réglage initial: Souligné FADER * R06 – F06 : Ajustez la balance de sortie avant-arrière [00] des enceintes. BALANCE * L06 – R06 : Ajustez la balance de sortie gauche-droite [00] des enceintes.
  • Page 67 Catégorie Article de menu Réglages pouvant être choisis, [ Réglage initial: Souligné BEEP • BEEP ON : Met en service la tonalité des touches. Tonalité sonore • BEEP OFF : Met hors service la tonalité des touches. des touches TEL MUTING •...
  • Page 68 Sélection d’une couleur variable pour l’éclairage des touches et de l’affichage Vous pouvez choisir une couleur séparée pour l’éclairage des touches (sauf pour EQ/BASS-TRE / DISP) et de l’affichage. Zone des touches Zone d’affichage Toutes les zones Répétez les étapes 2 et 3 pour choisir [Maintenez pressée] une zone différente et votre couleur...
  • Page 69 Création de votre propre couleur de jour et de nuit—USER Vous pouvez créer vos propres couleurs pour <DAY COLOR> et <NIGHT COLOR> et l’appliquer aux zones des touches et de l’affichage. • <DAY COLOR> Affiché quand <DIMMER> est réglé sur <DIMMER OFF>. •...
  • Page 70 Pour en savoir plus à propos de cet autoradio Opérations de base Opérations des disques/USB Généralités Précautions pour la lecture de disques à • Si vous mettez l’appareil hors tension pendant double face l’écoute d’une plage, la lecture reprendra à •...
  • Page 71 Lecture d’un CD-R ou CD-RW • Cet autoradio peut reproduire les fichiers MP3/WMA respectant les conditions • Utilisez uniquement des CD-R ou CD-RW suivantes: “finalisés”. – Débit binaire pour MP3/WMA: 32 kbps à 320 • Cet appareil peut uniquement reproduire les kbps fichiers du même type que ceux du premier –...
  • Page 72 Lecteur de plages MP3/WMA à partir • Les périphériques USB munis de fonctions spéciales telles que des fonctions de d’un périphérique USB protection des données ne peuvent pas être • Lors de la lecture à partir d’un périphérique utilisés avec cet appareil. USB, l’ordre de lecture peut différer de celui •...
  • Page 73 – iPod nano (3e Génération) * – iPod nano (4e Génération) * – iPod nano (5e Génération) * JVC ne peut être tenu responsable pour toute – iPod touch * perte de données dans un iPod/iPhone et/ – iPod touch (2e Génération) * ou un périphérique USB à...
  • Page 74 Entretien Comment nettoyer les connecteurs Pour garder les disques propres Un détachement fréquent détériorera les Si le disque est sale, sa lecture connecteurs. risque d’être déformée. Si un Pour minimiser ce problème, frottez disque est sale, essuyez-le avec périodiquement les connecteurs avec un un chiffon doux, en ligne droite coton tige ou un chiffon imprégné...
  • Page 75 ( Si “PROTECT” ne disparaît, consultez votre revendeur d’autoradio JVC ou la société qui fabrique les kits. Cet autoradio ne fonctionne pas Réinitialisez l’appareil. ( du tout. Cochez le réglage <SRC SELECT> = <AUX IN>.
  • Page 76 Symptôme Remède/Cause Le disque ne peut pas être • Utilisez un disque avec des plages MP3/WMA reproduit. enregistrées dans un format compatible avec ISO 9660 Niveau 1, Niveau 2, Romeo ou Joliet. • Ajoutez le code d’extension <.mp3> ou <.wma> aux noms de fichier.
  • Page 77 Symptôme Remède/Cause Les plages/dossiers ne sont pas L’ordre de lecture est déterminé par l’estampille reproduites dans l’ordre prévu. temporelle d’écriture. La première plage/dossier écrit dans le périphérique USB sera la première plage/ dossier pour la lecture. • “CANNOT PLAY” clignote sur •...
  • Page 78 Symptôme Remède/Cause Le son est interrompu ou saute • Réduisez la distance entre cet appareil et le pendant la lecture d’un périphérique périphérique audio Bluetooth. audio Bluetooth. • Déconnectez le périphérique connecté pour “BT-PHONE”. • Mettez l’appareil hors tension, puis de nouveau sous tension.
  • Page 79 • La marque du mot et les logos Bluetooth sont la propriété de Bluetooth SIG, Inc. et toute utilisation de ces marques par Victor Company of Japan, Limited (JVC) est faite sous licence. Les autres marques et noms de commerce sont la propriété de leur propriétaire respectif.
  • Page 80 Spécifications Puissance de sortie maximum: Avant/ 50 W par canal Arrière: Puissance de sortie en mode Avant/ 20 W par canal pour 4 Ω, 40 Hz à continu (RMS): Arrière: 20 000 Hz avec moins de 1% de distorsion harmonique totale. Impédance de charge: 4 Ω...
  • Page 81 Type: Lecteur de disque compact Système de détection du signal: Capteur optique sans contact (laser semi-conducteur) Nombre de canaux: 2 canaux (stéréo) Réponse en fréquence: 5 Hz à 20 000 Hz Plage dynamique: 96 dB Rapport signal sur bruit: 98 dB Pleurage et scintillement: Inférieur à...
  • Page 82 The countries where you may use the Bluetooth® function Die Länder, in denen Sie die Bluetooth® Funktion verwenden können Pays où vous pouvez utiliser la fonction Bluetooth® De landen waar u de Bluetooth®-functie mag gebruiken Países en los que se puede utilizar la función Bluetooth® Paesi nei quali è...
  • Page 83 Country Country Andorra Luxemburg Luxembourg Lëtzebuerg Australia Latvija Österreich Monaco Bosna i Hercegovina Crna Gora Belgien Македонија Belgique Malta България Nederland Canada Norge Schweiz New Zealand Suisse Polska Κύπρος Kıbrıs Portugal Česká republika România Deutschland Srbija Danmark Россия Eesti Sverige España Singapore Suomi...

Table of Contents

Save PDF