Cassette Operation - Sharp QT-CD161H Operation Manual

YT
<P=001>
(Continued)
Repeat play
An entire disc can be continuously repeated.
To repeat all of the tracks on the disc:
Press the PLAY/REPEAT (
0 R
playback.
Repeat play indicator
To cancel repeat play:
Press the PLAY/REPEAT (
Cue and review
1
Load a disc and begin playback.
2
Hold down the CUE
2
audible fast forward, and hold down the
REVIEW ( ) button for audible fast
3 / 5
reverse.
3
Normal playback will resume when the
VIEW ( ) or CUE
3 / 5
released.
Notes:
If the end of the disc is reached whilst cueing,
the CD will pause. Press the
) button for fast reverse or press the STOP
5
( ) button to stop CD operation.
If the beginning of the track is reached whilst
reviewing, the mode will automatically switch to
normal playback at that point.
HEADPHONES
Be sure your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended imped-
ance is 32 ohms.
Connect the headphones plug to the PHONES
socket. The speakers will be automatically dis-
connected. Adjust the volume by using the VOL-
UME control.
) button twice during
) button again.
0 R
( ) button for
2 / 4
3
RE-
3
( ) button is
2 2 / 4
REVIEW (
3 3 /
6
QT-CD161H(SUK) TINSE0026SJZZ

CASSETTE OPERATION

Tape playback
POWER
RECORD PLAY REWIND
1
Set the function switch to TAPE.
2
Load the cassette into the cassette compart-
ment.
3
Press the PLAY button.
4
To advance the tape, press the STOP/EJECT
button, then press the F FWD button. To rewind,
press the STOP/EJECT button, then press the
REWIND button.
To interrupt playback:
Press the PAUSE button during playback.
Press the PAUSE button again to resume playback.
To stop playback:
Press the STOP/EJECT button.
Precautions:
Be sure not to press the PLAY and REWIND
buttons simultaneously, or the tape will become
damaged.
Before changing from one tape operation to
another, press the STOP/EJECT button.
Do not press the PAUSE button whilst the fast
forward or rewind operations are in progress.
The F FWD or REWIND button will not be re-
leased when the tape end is reached. Once this
occurs, press the STOP/EJECT button.
F FWD STOP/EJECT PAUSE