Sharp QT-CD131H Operation Manual page 9

<P=002>
Recording from the CD
1
2
Set the FUNCTION
switch to CD.
FUNCTION
TUNER
TAPE CD
STOP/EJECT
STAND-BY ON
Load the disc to be
recorded.
To stop recording:
Press the STOP/EJECT button.
Note:
If the STOP button on the CD player is pressed
whilst recording, or if the CD comes to its end,
the tape deck will not stop.
To record a specific track:
Press the UP or DOWN button on the CD player until
the desired track number is displayed, then start
recording.
Recording from the radio
1
2
Set the
Load a blank cas-
FUNCTION
sette into the cas-
switch to
sette compartment.
TUNER.
FUNCTION
TAPE TUNER CD
STOP/EJECT
STAND-BY ON
Tune in to the
station to be
recorded.
To erase a recorded tape:
1 Set the FUNCTION switch to TAPE.
2 Load the tape to be erased into the cassette
compartment.
3 Press the RECORD button.
Load a blank cassette
into the cassette
compartment.
Before recording:
When recording important selections, be sure to
make a preliminary test to ensure that the desired
material is being properly recorded.
The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
The VOLUME and X-BASS controls may be
adjusted with no effect to the recorded signal.
(Variable Sound Monitor)
Metal and CrO
ding.
3
Press the
PAUSE
button.
PAUSE
8
QT-CD131H(SUK) TINSE0007SJZZ
3
4
P ress the
Press the
RECORD
PLAY/REPEAT
button.
button on the
CD.
PLAY /
REPEAT
RECORD
tapes cannot be used for recor-
2
5
4
P r es s t he
Press the
RECORD PAUSE but-
ton again.
button.
RECORD
PAUSE