Sharp QT-CD131H Operation Manual page 5

YT <P=001>
CD playback
1 2
Set the FUNCTION
switch to CD.
FUNCTION
TAPE TUNER CD
STAND-BY ON
"Cd" will be displayed.
Note:
When "Cd" or track number is displayed, the
power is connected.
If you will not be using the CD player, set the
FUNCTION switch to STAND-BY.
Precautions:
Do not open the CD compartment whilst the disc
is rotating.
If the disc is damaged, dirty, or loaded upside
down, the total number of tracks will not appear.
Clean, replace, or reload the disc properly.
Keep foreign objects out of the CD compartment.
Subjecting the unit to shock or vibration may
cause mistracking.
Keep the CD compartment closed except when
loading discs.
Playing certain compact discs at a high volume
may cause mistracking. In this case, listen at a
lower volume.
The temperature range for playing compact discs
is recommended to be 5˚C (41˚F) - 35˚C (95˚F).
If TV or radio interference occurs during CD
operation, move the unit away from the TV or
radio.
Repeat play
During playback,
To repeat all of the
Press
REPEAT
tracks on the disc
P r e s s
To cancel repeat REPEAT
again
play
Load a CD.
CD EJECT
Open
Label facing up
The total number of tracks will be
displayed.
APSS (Auto Program Search System)
To move to the be-
ginning of the next
track
To listen to the track
being played again
To skip a number of tracks at one time, press the
UP or DOWN button repeatedly until the desired
track number is shown.
To start playback from a desired track, press the
UP or DOWN button whilst in the stop mode to
select the track number, and then press the
PLAY/REPEAT button.
Cue and review
To fast forward
audibly
To fast reverse
audibly
PLAY /
Notes:
If the end of the disc is reached whilst cueing, CD
PLAY /
operation will be paused. Press the
button for fast reverse or press the STOP button
to stop CD operation.
If the beginning of the track is reached whilst
reviewing, the mode will automatically switch to
normal playback at that point.
4
QT-CD131H(SUK) TINSE0007SJZZ
3
Press the
PLAY/REPEAT
button.
PLAY /
REPEAT
0
" " will appe ar
and playback will
Close
begin from track 1.
To stop
playback
STOP
During playback,
CUE UP
During playback,
DOWN REVIEW
During playback,
CUE UP
hold
During playback,
DOWN REVIEW
hold
3
REVIEW