Dual Recording; Still Button; Power Switch; Selection Switch - Sharp ViewCam-Slim VL-ME10E Operation Manual

Useful Features
Camera Recording

Dual Recording

Available mode: DUAL-CAMERA
By setting the camcorder to DUAL-CAMERA
mode, you can automatically record motion
images on a tape and still images on a card
without operating the Media Selection switch.

STILL button

REC START/STOP button
1
Make sure that a Mini DV cassette and a
card are inserted in the camcorder.
2
Set the Media Selection
switch to DUAL.
3
Hold down the Lock button and set the
POWER switch to CAMERA.
• The camcorder turns on in DUAL-
CAMERA mode.
• The camcorder is now ready to record
(Recording Standby mode).
AU TO
Lock button
FADE
Note: You can select the desired picture
quality for still images recorded on a card
(see page 74).
39
Number of shots remaining
Number of shots taken
2 / 9 8
NORMAL
6 0min
GAMMA SRCH SRCH SRCH
Resolution setting indicator
4
Press the REC START/STOP button to
begin recording motion images of the
subject on a tape.
• Operate the camcorder just as you
ordinarily would when recording in
TAPE-CAMERA mode.
AU TO
6 0min
FADE
Press the STILL button to record a still
image of the subject on a card.
• The O indicator flashes red while the
image is being recorded on the card.
AU TO
6 0min
FADE
Notes:
• If you press the STILL button while recording
motion images on a tape in DUAL-CAMERA
mode, a still image of the subject is recorded on
the tape for 1.5 seconds as well as on a card
(the Q indicator is recorded on the tape along
with the still image).
• See page 79 for playing back still images
recorded on a card.
R E C
2 / 9 8
NORMAL
GAMMA
SRCH SRCH SRCH
CARD CARD
2 / 98
NORMAL
Q
SRCH
GAMMA