Table of Contents
Advertisement
Useful Features
Playback
Playback Effects
Available mode: TAPE-VCR
Playback effects can be used to create an
interesting scene transition between a still image
and the following image during playback.
Type of Playback Effects
OVERLAP: A still image fades out as the next
image fades in, replacing the previous image.
The two scenes momentarily dissolve.
WIPE: A still image is replaced with the next
image first appearing in the middle of the
screen and gradually expanding to fill the
screen.
Preparation
Plan the scene transition, and record still
images with the still recording function (see
page 40).
Notes:
• Playback effects can also be used to provide a
transition from a still image to a moving image.
• Record images for 6 seconds or longer. An
image recorded for less than 6 seconds may not
dissolve properly.
51
Using Playback Effect
1
In TAPE-VCR mode, press the MENU/
DISPLAY button until the menu screen
appears.
2
Select V, then press SET. Select "PB
EFFECT" (1), then press SET (2).
PL AY BACK SE T
AUD I O DUB
AUD I O
SET
P I C. E F F EC T
a
s
PB E F F EC T
MULTI F RAME
RETURN
1
1
2
a
3
Press f or d to select "OVERLAP" or
"WIPE", then press SET.
PB E F F EC T
4
Press the MENU/DISPLAY button to
turn off the menu screen.
5
Rewind or fast forward the tape to just
before the position where you want to
use the playback effect, and then begin
playback.
• The still image is replaced with the next
image with the selected playback effect.
To cancel the playback effect
Select "OFF" in step 3 above.
Notes:
• Playback effects will be canceled if Multiple
Strobe Playback, Picture Effect Playback or
Playback Zoom is used thereafter.
• Playback effects will be canceled if the power
source is interrupted.
OF F
OV E RL AP
W I PE
SET
s
W I PE
Advertisement
Table of Contents
