Sharp MD-MT280E Operation Manual page 45

ERROR MEANING
MESSAGES
" Poor connection of the digital cable.
NO SIGNAL
" No output signal comes out from the
connected unit.
(Use the AC power for the connected
unit.)
" The input signal has improper sam-
pling frequency.
" You tried to record on a playback-
PLAY MD
only disc.
" AC adaptor other than specified.
POWER?
PROTECTED " The write protection tab of a MiniDisc
is set to the protected position.
" Since a track number is currently be-
SORRY
ing located or updated, the unit can-
not accept your command.
(Wait a while and try the operation
again.)
ERROR MEANING
MESSAGES
" The temperature is too high.
TEMP OVER
(Turn off the power, and wait a while.)
" There is an error in the recording sig-
TOC FORM
(**) nal.
(Erase all of the tracks, and then record
again.)
" There is no space left for recording
TOC FULL
character information (track names,
disc names, etc.).
" The track has been protected from
Tr. Protect
being erased.
(Edit the track with the device on which
it was recorded.)
" A disc which contains data other
? DISC
than music was played.
(A disc which contains nonmusic data
cannot be played.)
" There is an error in the signal record-
ed on the disc.
A number or symbol appears in (*) position.
03/1/16 MD_MT280E_UK_6.fm
MD-MT280E
6
5
4
3
2
1
45