Specifications - Sharp ViewCam VL-A111S Operation Manual

Specifications

VIEWCAM
Recording System: 2 rotary heads, helical scanning system
Recording/Playback Time: 120 minutes (P5-120)
Pickup Device:
Lens Filter Diameter: 46 mm
Colour Temperature Compensation: Auto white balance with white balance lock
Minimum Illumination: 0.8 lux* (with gain-up, F1.4)
Video Output Level: 1.0 Vp-p 75-ohm unbalanced
Audio Output Level:
Speaker Output: 200 mW
Power Requirement: DC 3.6 V (with battery pack)
Power Consumption: 4.9 W (during camera recording in full auto mode with zoom
Operating Temperature: 0 C to
Operating Humidity: 30% to 80%
Storage Temperature:
Dimensions (approx.): 183 mm (W)
Weight (approx.): 710 g (without battery pack, lithium battery, video cassette, and
AC Adapter (UADP-0313TAZZ)
Power Requirement: AC 110–240 V, 50/60 Hz
Power Consumption: 15 W
Dimensions (approx.): 68 mm (W)
Weight (approx.): 233 g
Specifications are subject to change without notice.
*Minimum illumination: Since there is no widely accepted testing procedure for determining minimum
Signal System: PAL standard
Cassette: 8 mm video tape, MP type
Tape Speed: 20.051 mm/second
1 ⁄ (6.4 mm, effective size: 4.5 mm) CCD image sensor (with
4
approx. 320,000 pixels including optical black)
Lens: 16 power zoom lens (F1.4, f 4.0–64.0 mm), and full-range
auto focus
Monitor: 3 (7.5 cm) full-colour LCD screen (TFT active matrix)
Microphone: Electret monaural microphone
8 dBs, impedance less than 2.2 kohms
DC 7.0 V (with AC adapter)
motor off and backlight in normal mode)
20 C to
lens cap)
DC Output: 7.0 V
illumination capability, lux ratings are comparable only between models from the
same manufacturer.
40 C
60 C
109 mm (H) 99 mm (D)
37 mm (H) 130 mm (D)
58