Playback; Volume Control - Sharp ViewCam VL-A111S Operation Manual

Basic Operations

Playback

Playback
The LCD monitor screen makes it possible to
play back and see what you have just
recorded. Nothing needs to be connected,
allowing instant on-screen playback with the
sound through the built-in speaker.
LCD monitor screen
DISPLAY button
1
Hold down the Lock
button and slide the
Power switch
to VCR.
• The screen appears.
2
Press the REW (C) (or FF [B]) button
to rewind (or fast forward) the tape to the
desired point.
3
Press the PLAY button (D) to begin
playback.
Power switch
Lock button
REW P L AY F F ST OP ST I L L
REW P L AY F F ST OP ST I L L
To Stop Playback
Press the STOP
button (A).
Note:
• If you wish to turn the Operation button
indicators on or off, press the DISPLAY button.
The playback operation buttons will still function
as indicated even after the indicators are turned
off.
Auto Tape Rewind
The tape is automatically rewound when
playback reaches the end of the tape.
To Turn the Power Off
Slide the Power switch to OFF.

Volume Control

While the VIEWCAM is in VCR mode, push the
Volume control to the
(Q) or decrease (W) the volume to your
preference.
The volume level indicator will appear on the
screen during adjustment only. When the
Volume control is released, the volume level
indicator will disappear shortly afterwards.
Increase
Decrease
REW P L AY FF ST OP ST I L L
or side to increase
Volume control
22