Selecting The Transmission Speed (Rs-232C) - Sharp XV-Z9000E Operation Manual

Selecting the Transmission Speed (RS-232C)

2,3,4
5
(GUI) On-screen Display
This menu allows you to adjust the transmission speed
of the RS-232C connection by selecting the baud rate.
1 Press MENU.
1,6
2 Press
3 Press
4 Press
5 Press ENTER to save the setting.
6 To exit the GUI, press MENU.
• Make sure that both the projector and computer are set for
the same baud rate. Refer to the computer's operation
manual for instructions for setting the baud rate.
/ to select "Options".
/ to select "RS-232C", and then press
.
/ to select the desired baud rate.
42