Table of Contents
Advertisement
Connecting to RGB
Video Equipment Using
the DVI to 15-pin D-sub
Adaptor and the RGB
Cable (INPUT 2)
Use the DVI to 15-pin D-sub adaptor and the
RGB cable when connecting RGB video equip-
ment such as DVD players and DTV decoders
to INPUT 2 terminal.
1
Connect a DVI to 15-pin D-sub
adaptor to the projector.
2
Connect the above adaptor to
an RGB cable.
3
Connect the above cable to the
video equipment.
• Secure the connectors by tightening the
thumbscrews.
Note
• When connecting this projector to DVI out-
put of the DTV decoder, select "RGB" for
"Signal Type" on the OSD menu or press
on the remote control. (See page 52.)
Optional
DVI to 15-pin D-sub adaptor
accessory
Type: AN-A1DV (20 cm)
To INPUT 2 terminal
DVD player or
DTV decoder
DVI to 15-pin
D-sub adaptor
(sold separately)
RGB cable
(commercially
available)
To RGB output terminal
-19
Advertisement
Table of Contents
