Connecting To A Wired Network - Epson PowerLite 1815p User Manual

Managing Projectors
136

Connecting to a Wired Network

Follow these steps to connect the projector to your network and
configure it with an IP address.
1. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable. Connect the
cable to the port on the projector. See page 53.
LAN
2. Point the remote control at the projector and press the P
button.
3. Press the
EasyMP
as the source.
4. Press the button on the remote control, select the
Menu
menu, then press
Network
5. Choose
To Network Configuration
6. Choose
Wired LAN
You see the following screen:
7. Do one of the following:
If your network assigns addresses automatically, turn on the
■
setting.
DHCP
button on the remote control to select EasyMP
.
Enter
and press
and press .
Enter
Power
.
Enter