Turning On the Projector
Be sure to read the Important Safety Instructions starting on p.44 before projecting images.
Connecting the Power Cable
Procedure
1
2
3
4
5
8
Lit orange
Make sure the power is off for all
components connected to the
projector.
Remove the lens cover.
Connect the video source or computer
to the projector (see Quick Setup).
Connect the power cord to the
projector.
Check that the power cord connector is facing the
same way as the power inlet on the projector, and
then insert the power cord securely into the
projector.
Connect the other end of the power
cord to a grounded electrical outlet.
Wait until the Power indicator lights orange.
The projector's control panel and remote
control buttons cannot be operated while
the Power indicator is flashing orange.
Need help?
Do you have a question about the PowerLite 30c and is the answer not in the manual?