Turning Off The Projector - Epson PowerLite 30c User Manual

Turning Off the Projector

Turning Off the Projector

Follow the procedure below to turn off the projector's power.
Procedure
1
2
3
4
10
Projector Remote control
Power
Computer S-Video/Video
Menu A/V Mute Freeze
E-Zoom
Power OFF?
Please press key again
to power off .
Stops flashing and lights orange
Do not disconnect the power cable from the outlet while the Power indicator is still
flashing orange, because it may result in projector operation errors and reduced
lamp unit operating life.
Turn off the power for the signal
sources that are connected to the
projector.
Check that the power for all connected
components has been turned off.
Press the [Power] button on either the
projector's control panel or the remote
control.
Color Mode
The confirmation message shown to the left will
appear. If you do not want to turn off the power,
press any button except the [Power] button.
If you do not press any button, the message will
disappear automatically after seven seconds. (In
this case, the power will not turn off.)
Press the [Power] button once more.
The lamp will switch off. The Power indicator
will flash orange and cool-down will start.
The cool-down period lasts for about 25 seconds.
(This varies depending on factors such as the
ambient air temperature.) When cool-down is
complete, the Power indicator lights orange.
The projector's control panel and remote
control buttons cannot be operated while
the Power indicator is flashing orange. Wait
until it lights steadily.
Unplug the power cable from the
electrical outlet.