JVC KD-R901 Instructions Manual page 38

iPod/iPhone operations
• You can control the following types of iPods/iPhone:
(A) Connected with the USB cable:
– iPod with video (5th Generation) *
– iPod classic * 1, * 2
– iPod nano
– iPod nano (2nd Generation)
– iPod nano (3rd Generation) *
– iPod nano (4th Generation) *
– iPod Touch * 1, * 2
– iPod Touch (2nd Generation) *
– iPhone/iPhone 3G * 1, *
(B) Connected with the interface adapter:
– iPod with Click Wheel (4th Generation)
– iPod mini
– iPod photo
– iPod with video (5th Generation)
– iPod classic
– iPod nano
– iPod nano (2nd Generation)
– iPod nano (3rd Generation)
– iPod nano (4th Generation) *
1
* It is not possible to browse video files on the "Videos"
menu.
2
* <iPod Mode> is available (see page 21).
3
* It is not possible to charge the battery through this
unit.
• If the iPod does not play correctly, please update your
iPod software to the latest version. For details about
updating your iPod, visit <http://www.apple.com>.
• When you turn on this unit, the iPod is charged
through this unit.
• The song order displayed on the selection menu of
this unit may differ from that of the iPod.
• The text information may not be displayed correctly:
– Some characters such as accented letters cannot be
shown correctly on the display.
– Communication between the iPod and the unit is
not stable.
38
1
1, * 2
1, * 2
1, * 2
2
3
• If the text information includes more than
16 characters, it scrolls on the display.
This unit can display up to 40 characters for "iPod"
and up to 64 characters for "iPod FRONT/iPod
REAR."
Notice:
When operating an iPod, some operations may not
be performed correctly or as intended. In this case,
visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English
website only)
DAB
• Only the primary DAB service can be preset even
when you store a secondary service.
• A previously preset DAB service is erased when a new
DAB service is stored in the same preset number.
Menu operations
• <Auto> setting for <Dimmer> may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, change the <Dimmer> setting to any
other than <Auto>.
• If <LCD Type> is set to <Auto>, the display pattern
will change to the <Positive> or <Negative>
pattern depending on the <Dimmer> setting.
• If you change the <Amplifier Gain> setting from
<High Power> to <Low Power> while the
volume level is set higher than "Vol 30", the unit
automatically changes the volume level to "Vol 30."