Epson G5150Nl Operation Manual page 89

Troubleshooting
Check
Failed to acquire network adapter information.
One or more connected projectors do not support
resolutions greater than SXGA. Reduce the screen
resolution and reconnect.
There are projectors that do not respond.
Enter the keyword displayed in the projector.
f Network settings are not restored after cutting the connection to the computer with EMP NS Connection.
Check
Are you manually connecting to a wireless LAN when
the computer starts up?
Quick Connection Mode
Check the following points.
• Is a network adapter installed on the computer?
• Is the driver for the network adapter used installed on the computer?
After checking, restart the computer and connect again.
If you still cannot connect, check the network settings on the computer and the network settings on the
projector.
For details on the network settings to be made on the projector, see your User's Guide.
There is an PowerLite 735c projector in the connection destination. Change the computer's screen resolution
to SXGA (1280 ^ 1024) or less.
You cannot connect to multiple projectors simultaneously. Check the network settings on the computer and the
network settings on the projector.
For details on the network settings to be made on the projector, see your User's Guide.
Check the projector's keyword displayed on the EasyMP standby screen, and enter the projector's keyword.
Try connecting to the wireless LAN manually.
Remedy
Remedy
89