Epson G5150Nl Operation Manual page 76

Sending Scenarios
D
When transfer is complete, a message is displayed
confirming whether to perform autorun setup. If you
want to set autorun, click "OK" and continue with
step 5. Otherwise, click "Cancel" and skip to step 7.
All scenario files within the destination drive are displayed in the
scenario list on the left in the format "Folder name/File name".
E
When using Autorun
To set a scenario to run automatically when the projector power is
turned on, click the target scenario name in the scenario list, and
click " ".
The scenario is displayed in the autorun scenario list on the right
and set as an autorun file.
A scenario file in a folder with deep hierarchy or with a long folder
name cannot be selected.
When projecting a scenario repeatedly
To start projecting from the first scenario again once projection of
all scenarios in the "Autorun Scenario List" is complete, select
"Revive" check box.
• Autorun can also be set by selecting "Scenario Option" -
q
"Edit Autorun".
• Autorun setting cannot be specified in EasyMP for PC Free.
• If there are two or more files set for autorun, they are
played back in order from the top on the "Autorun
Scenario List".
F
When the scenario for autorun is set, click "OK".
G
Remove the USB storage device or SD card from the
computer.
See the computer's user's guide for the removal method.
H
After finishing transferring your scenario, connect
the USB storage device or SD card to the projector
and start projection using PC Free. s
76
p.51