Epson G5150Nl Operation Manual page 88

Troubleshooting
f When a connection is made using EMP NS Connection, the screen does not refresh when running an Office application.
Check
Is the mouse moved continuously?
Cannot use a PowerPoint file in EMP SlideMaker2
f
Check
Is a PowerPoint file (.ppt) with a PowerPoint 95/97
format being used?
If a PowerPoint file (.ppt) cannot be included in a
scenario, or it cannot be displayed as a thumbnail, is
the Microsoft Office JPEG converter installed?
Error message when starting up EMP NS Connection
f
Check
Failed to connect to the projector.
The keyword does not match. Check how it is
displayed by the projector, and enter the correct
keyword.
The selected projector is busy. Do you want to
continue the connection process?
Failed to reset EMP NS Connection.
Cannot connect because the keyword was wrong.
When you stop moving the mouse cursor, the screen is updated. If the screen does not update quickly, stop
moving the mouse cursor.
EMP SlideMaker2 does not support PowerPoint 95 or 97. Files created in these versions of PowerPoint must
be opened and resaved in PowerPoint 2000 or later. s
Make sure the MS Office JPEG converter has been installed. See the MS Office documentation for
instructions.
Try to connect again. If it still does not connect, check the network settings on the computer and the network
settings for the projector's EasyMP.
For details on the network settings to be made on the projector, see your User's Guide.
Check the projector's keyword displayed on the EasyMP screen, and enter the projector's keyword.
You tried to connect to a projector that is connected to another computer.
When the "Yes" button is clicked, it connects to the projector. The connection between the projector and the
other computer is cut off.
When the "No" button is clicked, it does not connect to the projector.
The connection between the projector and the other computer is maintained.
Restart EMP NS Connection. If the message still appears, uninstall and then reinstall EMP NS Connection.
p.5
s
When connecting to a projector for which a projector keyword has been set, the wrong keyword is entered.
Check the keyword that is displayed on the projector's connection standby screen. After the connection is cut
off and then reconnected, enter the projector keyword on the keyword entry screen that is displayed.
p.11
s
Remedy
Remedy
p.63
Remedy
88