Automatically Saving Files Using the
START key
By placing the camera on the RICOH BASE and pressing the
START key
, you can automatically save files in the
camera in the specified folder in the Macintosh.
Important
• Select [Automatically save at Push START key] for the Automatic
Save Setting of the START key. Unless this option is selected, files
cannot be automatically saved using the START key.
m m m m See "Changing the Setting of the START key" (p.29).
Note
• Settings related to saving the format, destination folder, etc. of still
image files vary depending on the Save Settings registered on the
Save 1 and Save 2 buttons.
m m m m See "Changing the Save Button Settings" (p.26).
1
Check that the RICOH BASE is properly
connected to the Macintosh.
m m m m See "Connecting the RICOH BASE to a Macintosh"
(p.17).
2
Check that the AC adapter is properly
connected to the RICOH BASE.
3
Place the camera on the RICOH BASE.
4
Press the START key
BASE.
The file in the camera will be saved in the Macintosh.
Note
• If [Turn off camera after saving] is selected in the Save button
settings under [Automatic save setting] in Options, the
confirmation message will be displayed and the camera will
be turned off.
m m m m See "Changing the Setting of the START key" (p.29).
See "Changing the Save Button Settings" (p.26).
on the RICOH
3
31