Ricoh Caplio Gate for Macintosh Operation Manual page 48

Important
• Remove the camera from the
RICOH BASE before
turning the camera off.
46
3
Connect the AC adapter to the RICOH
BASE, and connect the Macintosh to the
RICOH BASE with the USB cable.
4
Attach the arm to the RICOH BASE.
5
Set the mode dial on the camera to
(motion picture) and place the camera
on the RICOH BASE.
6
Press the START key
BASE.
7
Aim the camera at the subject and
adjust the direction and angle.
8
Start up the application software.
on the RICOH