Adjust The Image - Epson EX50 Quick Setup Manual

Connecting with an HDMI cable (EX70 only)
For the best image and sound quality, connect your video equipment
to the HDMI port, if possible.
1
Connect an HDMI cable (not included) to the HDMI port on your
video player and the HDMI port on the projector.
2
Start your video or presentation. Use the Source Search button
on the projector or the Search or Source Search button on the
remote control to select the HDMI source, if necessary.
Connecting with a component video cable
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use a
component-to-VGA cable (not included) to connect the projector. Or,
with the EX30 and EX50, you can use a component video cable (not
included) along with the included component-to-VGA adapter.
Once you've connected the cable(s), start your video or presentation.
Use the Source Search button on the projector or the Search or
Source Search button on the remote control to select the video
source, if necessary.
You can connect an optional audio cable if you want to play sound
through the projector. See the User's Guide on your CD-ROM for
instructions.
6

Adjust the image

1
T o raise the image, press the foot release lever and lift the front
of the projector. Release the lever to lock the foot in the position
you want.
2
Rotate the focus ring to sharpen the image. To reduce or enlarge
the image, rotate the zoom ring (EX50/EX70 only) or press the
Wide (enlarge) or Tele (reduce) button on the projector's control
panel (EX30 only).
Zoom ring
(EX50/EX70 only)
3
I f your image looks like
is facing the screen squarely. Then, if necessary, press the
and
looks correct.
buttons on the projector's control panel until the image
or , first make sure the projector
Focus ring