Telnet Commands - HP StorageWorks 8B - FC Entry Switch Release Note

New Features and Enhancements
Routing Tab: The new Routing tab, available from the Admin View, can be used to view the
routing table and to set the link cost for the selected ports and static route. For more information,
refer to the Web Tools User's Guide.
Trunk Information Tab: The new Trunk Information tab, available from the Admin View, is a
read-only tab that displays trunk information. For more information, refer to the Web Tools User's
Guide.
Report Tab: The new Report tab, available from the Admin View, is a read-only tab that displays
information about all of the switches, interswitch links, and ports in the Fabric. For more
information, refer to the Web Tools User's Guide.
SNMP Tab: The SNMP tab, available from the Admin View, has been updated to include
"Community and Trap Recipient Configuration" and "Access Control List Configuration"
information. It can now be used to specify the switch community string, location, trap level, and
trap recipients. For more information, refer to the Web Tools User's Guide.

Telnet Commands

The following telnet commands have been added or modified in Fabric OS version 3.0.1b:
•
turboRamTest
•
portCfgSpeed
•
switchCfgSpeed
•
msTDEnable
•
msTDDisable
•
islShow
•
portCfgShow
•
diagHelp
•
statsTest
•
fDefectTest
•
perfAddEEMonitor
•
perfAddIPMonitor
•
perfAddReadMonitor
•
perfAddRWMonitor
•
perfAddSCSIMonitor
•
perfAddUserMonitor
•
perfAddWriteMonitor
•
perfCfgClear
•
perfCfgRestore
•
perfCfgSave
•
perfClrAlpaCrc
•
perfDelEEMonitor
•
perfHelp
•
perfDelFilterMonitor
•
perfSetPortEEMask
•
perfShowAlpaCrc
•
perfShowEEMonitor
Fabric OS v3.0.1b Release Notes - 6