Remote Control - Epson dreamio EMP-TW200H User Manual

Remote Control

Buttons with no explanation function in the same way as the corresponding buttons on the projector's
control panel. Refer to "Control Panel" for further details on these buttons.
• • • •
Remote control light-emitting area
Setup Guide
Outputs remote control signals.
• • • •
Indicator
Illuminates when remote control
signals are being output.
• • • •
Menu button p.23
• • • •
Memory button p.12
Displays a selection menu for
selecting memory settings.
• • • •
Select/Line menu button
p.8, p.12, p.23
• • • •
buttons
p.8, p.12, p.23, Setup Guide
Press to select configuration menu and
selection menu items and adjustment
values and to adjust the zoom and focus.
• • • •
Setup Guide
Pattern button
Displays a selection menu for
selecting a test pattern.
• • • •
Zoom button
Setup Guide
• • • •
Blank button
The projected images switch off and
on each time this button is pressed.
• • • •
(Illumination) button
All buttons on the remote control
illuminate when this button is pressed.
The button illumination switches off
automatically after about 10 seconds
have passed.
Part names and Functions
• • • •
On/Off buttons
Press to turn the projector power on
and off.
• • • •
Color Mode button
Displays a selection menu for
selecting the colour mode.
• • • •
Aspect button p.8
• • • •
Esc button p.23
Source
Setup Guide
• • • •
D4 button: Switches the input source
to the projector's [D4] port.
When you need to switch the
input signal to match the
equipment that is connected to
the [D4] port, select the correct
signal using the selection menu.
The change will be reflected in
the "Input Signal" menu.
• • • •
InputA button: Switches the input
source to the projector's [InputA]
port.
When you need to switch the
input signal to match the
equipment that is connected to
the [InputA] port, select the
correct signal using the selection
menu. The change will be
reflected in the "Input Signal"
menu.
• • • •
InputB button: Switches the input
source to the projector's [InputB]
port.
• • • •
S-Video button: Switches the input
source to the projector's [S-
Video] port.
• • • •
Video button: Switches the input
source to the projector's [Video]
port.
• • • •
Setup Guide
Focus button
Setup Guide
p.8
5