Disc Operations - JVC EXAD KW-AVX820 Instructions Manual

Disc operations

The disc type is automatically detected, then playback starts (for some discs, the top menu of the disc appears).
If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.
If " " appears on the screen, the unit cannot accept the operation you have tried to do.
• In some cases, without showing " ," operations will not be accepted.
~
Open the monitor panel.
<Open/Tilt> screen is displayed.
• By pressing and holding the button, you can
open the monitor panel and eject the disc.
Ÿ
Prohibiting disc ejection
You can lock a disc in the loading slot.
Back
To cancel the prohibition, repeat the same
procedure to select <EJECT OK?>.
• Disc can be forcibly ejected. (
!
3)
Insert a disc.
Label side
Monitor panel closes automatically.
If not, press [Close].
Caution:
Do not place your finger behind the monitor panel.
When playing back a multi-channel encoded disc,
the multi-channel signals are downmixed.
• You can fully enjoy multi-channel sound by
connecting an amplifier or a decoder compatible
with these multi-channel sources. (
• To select the playback mode,
• To select tracks from the list,
OPERATIONS
60)
22.
23.
33