Stanley Woodburning Range Installation And Operating Instructions Manual page 5

Hide thumbs Also See for Woodburning Range:
Table of Contents

Advertisement

12.
Hang the fire door (Part No. 57) and the
ashpit door (Part No. 3) on their hinges.
13.
Place the oven shelves in position (Part
No.12) the cast iron shelf below the sheet
steel shelf.
14.
Place the cleaning door (Part No. 59) in
position beneath the oven door (Part No. 2).
15.
Screw the splashback (Part No. 67) to its
two supports (Part Nos. 61 & 62) keeping
the folded end to the bottom. Screw the
plate rack (Part No. 88) to the splashback.
Screw the complete assembly on to the
cooker top (Part No. 18).
The Waterford Stanley Woodburning Range is
equipped for top flue connection. Should you wish
to vent the range to the rear the following modifica-
tions must be undertaken:
1.
Remove the top flue collar (item 1) and seal
the opening with the blanking plate (item 2)
provided.
2.
Remove the small panel (item 3) from the
back of the range and the blanking plate
(item 4) which will now be visible.
3.
Screw the rear flue collar (item 5) provided
to the back of the range.
Fig.4
Fig.5
Note: Platerack and Splashback is an optional
extra, not supplied as standard.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents