Connecting To A Pc Desktop Computer - Epson EMP-7550 Owner's Manual

Connecting to a PC desktop computer

Before beginning, turn off the projector and computer if they
are on.
1. Connect the computer cable.
Note: Computer configurations vary. See your computer
manual for the location of the ports needed to connect your
projector.
a. Connect either end of the computer cable to the
b. Disconnect the monitor cable from the computer, and
c. If necessary, connect the monitor cable of the
d. Tighten the screws on all connectors.
8
projector's Computer In port.
connect the other end of the computer cable to the
terminal where the monitor cable is disconnected from
the computer.
computer monitor to the projector's Computer Out
port.
Monitor cable
Computer cable