GE Monogram ZDP48N4G Owner's Manual page 37

The Problem Solver
S_air_less S_eel ICang'e
Questions ?
B bre you
call Jbr
service...
PROBLEM POSSIBLE CAUSE
BURNERS DO NOT
LIGHT OR SPARK
RANDOMLY
BURNERS HAVF
YELLOW OR
YELLOW-TIPPED
FLAMES
BURNER FLAMES
VERY LARGE
OR YELLOW
BURNER CONTROL
KNOB WILL NOT
TURN
OVEN LIGHT
DOES NOT WORK
FOOD DOES NOT
BAI_] OR ROAST
PROPERLY
FOOD DOES NOT
BROIL PROPERLY
• Electrical plug is not phlgged into a live power outlet.
• Gas not turned on.
• Burner parts not replaced correctly.
• Holes in tile sinuner rings or slits in tile burner rings are clogged.
• Clogged orifice, or wet
btlYneYs oF
electrodes.
• Burner parts not replaced correctly.
A. Yellow flames: Call for
service.
B. Yellow tips on outercones:
Normal for LP gas.
g, Softblueflames: Normal
for natural gas.
• If burner flanles look like (A), call fin" service. Noimal burner flanles
should look like (B) or (C), dei)ending on tile type of gas.
• If cooktop is connected to I,P gas, contact the person who installed
Vo/Ir range or illa(le tile conversion.
• When tile knob is at tile OFF position, it nlust be I)ushed in befl)re
it can be turned, and it can only be turned in a counterclockwise
direction. Sinlilarly; when the knob is in the I,OW or X-HI
positions, it n/ust also be pushed in to change flanle settings.
• The light bulb is loose or defective. Tighten or replace the bulb.
• The switch oi)erating light is broken. Call fl)r service.
• The ()veil controls are iini)roi)erly set. See the "How to set vour ()veil
for baking or roasting" section.
• hlcorrect cookware or cookware of iinl)rol)er size being used.
See tile "How to set your oven fin" baking or roasting" section.
• Lrse a fi)il tent to slow down browning during roasting.
• The ()veil control is not set at BROIl, Push in the BROIl, selector
b/ltton [or tile ()veil VO/I want to /Ise.
• hni)roi)er shelf position being used. See tile Broiling Guide.
• Cookware is not suited for broiling. Use tile broiling pan and grid
that canle with your range.
• Ahuninuin ti)il used Oil tile broiling pan and grid has not been fitted
i)rol)erly and slit as recon/n/ended.
• In soIne areas tile power (voltage) nlav be low. Preheat tile broil
eleinent fin" l 0 n/inutes. Broil fi)r tile hmgest period of tiine
reconunended in tile Broiling Guide.
.t