Stainless Steel; Light Bulbs - GE Monogram ZV800 Owner's Manual

re and (;leaning
(hhnney %_nl Hood
Stainless steel
s!ztfaces
(on some models)
Do not use a steel wool pad; it will scratch
the surface.
To clean tile stainless steel surface, use warm
sudsy water, a stailfless steel cleaner such as
/';leen lZdng ¢'_or an all-puq)ose liquid or spray
cleaner. Always scrub in tile direction _ff tile
grain. Pdnse thoroughly with a sponge or cloth
and clean watei: Dry with a soil clean cloth.
_dter cleaning, use a stainless steel polish, such
as Stainless Steel Magic °, P,evere Copi)er and
Stainless Steel Cleaner O or Wenol _dl Puq)ose
Metal Polish ®. Follow the product instI uctions
fin" cleaning the stainless steel surti_ce.
Painted
Sur/ lces
(on some models)
Clean an) painted smthces with a mixture
of water and either soap or xinegar.
Do
not rise COlllI//eI'cial o_,en cleanei's, cleanin(r
powdei_, steel wool or harsh abrasixes on am
painted surii_ce.
Glass visor
Pull tile glass visor out and wash it with a damp
soapy cloth. Dr} it with a clean cloth and push it
back into place.
Light bulbs
NOTE: The glass cover should be removed only when
_old. I,l_aring" latex g'love,_ may q_fi,r a ballet g'rip.
CAUTION: Be*,,e
replacing
the
bulb, disconnect electrical power to the hood
at the main flBe or circuit breaker panel.
ATTENTION :A,,..t d e,'emet.'e
ell place l'aml)oule, d_)branchez le courant de la
hotte en elflevant le filsible i)iincipal ou en taisant
basctfler le disjoncteur au i)almeau d'alimei_tatiolL
Be sure to let the light coxer and bulb cool
completely.
For xour satet), do not touch a hot bulb with
bare hands or a dam I) cloth.
To remove:
1 Insert )our finger nail into tile inner glass
coxer slot and pull down. Remoxe coxer.
N07_: l)o nol remove older relaining" ring'.
2 Using gloxes or a dry cloth, remo'_e tile bulb
bx )ullino it straioht out.
• [ & ' O
To replace:
1 Use a new 12-xolt, 20-watt Halo,,en bulb fin.
O
a (;-4 base.
2 Using gloves or a dry cloth, renlove tile new
bulb fl'om its packaging.
N07_: Do not touch the new halog'en bulb with
bare fi_g'e_:v 7buching" the bulb with bare fing'e_:s
will s_qvz!/icanlly *'edu(e lhe l!fi_ o/the buN.
3 Push the bulb straight into the receptacle
all the way.
Receptacle
Socket
II
[IL-
__B
ulb
Glasscover
l ONLYuse a new 121volt, 2 0-watt Halogen bulb for a I
G-4 base.
l
Receptacle
cloth
For improved lighting; clean lt_e glass cover
*v(,uenlly usinff a dam ) _lolh ,]; 7 , /_ This should be done
when lhe hood is ( omplelely cool.
4 Snap tile glass cover into tile retainin,* tin *
5 Reconnect electrical power to tile hood.