Tuning Band; Auto Fine Tune - Zenith Sentry 2 Series Operating Manual & Warranty

SETUP MENU
TUNING BAND
Purpose
Allows for setting the TV tuner to match your antenna or
cable-TV system.
If you are having difficulty tuning channels, the TUNING
BAND may have to be set manually to match your viewing
needs.
Before Using TUNING BAND
Connect and turn ON all external equipment, such as cable-
TV decoder, VCR, etc. Use AUTO CH. SEARCH if not
previously used.
To Use TUNING BAND
1. TUNING BAND should be selected if you followed
the "Basic Menu Operation" given in the "On-
Screen Menus" section.
SETUP MENU
AUTO CH. SEARCH
CH. ADD[DEL
CH. LABELS
-->TUNING BAND
AUTO RNE TUNE
CLOCK SET
CAPI1ONS
CH. BACKGROUND
BROADCAST
Selecting Tuning Band
2. Press ADJUST (ADJ) Left/Right to select the
desired tuning band, as follows:
• BROADCAST is used for standard "over-the-air"
broadcasts.
• Cable -- CATV is used for most standard cable-TV
(CATV) systems.
• Cable - HRC is used for cable-TV ,;ystems that use
HRC (Harmonically Related Carrier).
• Cable - ICC is used for cable-TV systems using ICC
(Incremental Coherent Carrier).
Available Channels per Band
The channels that are available in the broadcast and cable
tuning bands are shown below:
BROADCAST Band
VHF 2 to 13 UHF 14 to 69"
* Channels above 69 are not selectable.
CATV, HRC and ICC Bands
i to 1.2.5"*
** Channels above 125 may not be s electable.
When Some Channels Are Not Clear
If some channels are no! clear, change the AUTO FINE
TUNE. You may have to try different TUNING BAND and
AUTO FINE TUNE settings until you get a clear picture,
channel-to-channel. Refer to the AUTO FINE TUNE op-
tion for details.
AUTO FINE TUNE
Purpose
Lets your TV compensate for variations in broadcast and
cable-TV frequencies.
If you are having difficulty tuning channels, the AUTO
FINE TUNE may have to be set manually to match your
viewing needs.
Before Using AUTO FINE TUNE
Connect and turn ON all external equipment, such as cable-
TV decoder, VCR, etc.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
• ->AUTO RNE TUNE
CLOCK SET
CAP]IONS
CH. BACKGROUND
FIXED
To Use AUTO FINE TUNE
1. AUTO FINE TUNE should be selected if you fol-
lowed the "Basic Menu Operation" given in the
"On-Screen Menus" section.
2. Press ADJUST (ADJ) Left/Right to select the
desired mode of operation, as follow:z:
• FIXED is used to receive "over-the-_fir" TV stations,
and with many cable TV systems.
• SEARCH is used only when the TV must search to
find the frequency being received!, such as when used
with certain VCRs and video game controllers.
When Some Channels Are Not Clear
If some channels are nol clear, change the TUNING
BAND. You may have to try different AUTO FINE TUNE
and TUNING BAND se,ttings until you get a consistently
clear picture, channel-to-channel. Refer to the TUNING
BAND option for detait_.
Selecting Auto Fine Tune
25_A 8 -- 3