Remote Control Model Sc3390; Operation; Preparation For Use; Installing Batteries - Zenith Sentry 2 Series Operating Manual & Warranty

REMOTE CONTROL MODEL SC3390
OPERATION
This remote control provides access to all on-screen menus,
as well as, access to special features that can not be ac-
cessed by using the control panel on the TV.
€
PREPARATION FOR USE
Batteries are provided with this remote, but you must install
them before using the remote.
For optimum performance, point the
remote control toward your Zenith 'IV.
OFF-ON
MENU, SELECT and ADJUST
Used with on-screen menus to see menu, ..._J
select an option, and adjust that option.
1
Numbered Buttons
Used to select a TV channel.
ENTER
Used to view the Channel/Time Display or
to remove any on-screen menu or display.
TIMER
Used to activate the SLEEP TIMER.
C:3 C::3
Used to turn TV ON or OFF.
FLSItBK (Flashback',}
Used to return to the last TV
you were watching.
CHANNEL Up/Down
Used to select a TV channel by going
Up or ])own through channels
programmed in your FAV. (Favorite)
CHANNELS scan sequence.
VOLUME Up/Down
Usexl to adjust the volume level of the
TV.
MUTE
Used to turn off sourld while the pic-
ture remains. Press again to restore
the sotmd.
CAPT][ONS
Used to view dosed ,captions broadcast
with some television programs.
SC3390
INSTALLING BATTERIES
When the effective operating range of your remote becomes
noticeably shorter, replace the batteries with two (2) high
quality, alkaline, size AAA batteries.
1. Remo've the battery compartment cover, PUSH
DOWN tab and PULL OUT from top.
2. Insert new batteries as indicated in the diagram
inside the compartment.
3. Replace the cover by inserting the tab on the bottom
of the cover into its housing. Snap the cover into
position.
1.
2597-A
NOTES:
• Be careful not to place heavy objects on top of the remote
control buttons. Prolonged accidental operation of the
remote control will shorten battery life.
• If you do not use the remote control for a taonth or more,
remove the batteries. Battery leakage can cause damage
to the remote control.
Zenith is not responsible for damage caused by such
battery leakage.
2.
5-1
_J