Advertisement
TO CORRRC 3"A _'RO(_ r :b" ' _,
• While setting a program; press the REW
button to go back one step and enter the correct
numbers using the PLAY or STOP button•
• After setting
a program;
1) Press the PWR button.
2) Repeat steps [1] - [2] on page 27.
3) Press the F,FWD button (or press the REW
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the PLAY or STOP button.
4) Press the PWR button to set automatic timer
recording.
• If the erase-prevention
tab is removed, the
cassette will be ejected when the PWR button
is pressed to off.
• If the tape runs out before the end time, the
TV!VCR will switch to the Stop mode
immediately,
and the tape will be ejected.
With this function, after timer recording is
finished, the tape will automatically
rewind to the
start of the recorded program(s).
• Use the remote control
for this procedure.
• After setting
a program;
1) Press the PWR button.
2) Repeat steps [1] - [2] on page 27 and select
a program you want to cancel.
3) Press the COUNTER
RESET button.
4) Press the MENU button to return to TV mode,
• While recording
is in progress;
1) Press PWR button.
2) Press
the
STOP/EJECT
button
on the
TV/VC R.
1) Press the PWR button so that the REC
indicator goes off.
2) Press the MENU button.
3) Confirm "TIMER PROGRAMMING"
is pointed
to.
4) Press the F.FWD button. The details of
programs
appear on the TV screen.
5) Press the MENU button to return to TV mode.
AUTO TIMER RECORDING REMINDERS:
• Make sure the channel you want to record is
properly set in advance.
• It is not necessary to press the REC button for
timer recording.
• Recording
begins automatically
at the Start
time.
• If you are recording
using a Timer mode, you
cannot operate the unit manually.
• The erase-prevention
tab on the cassette
must be in place (or you must put tape over
the hole).
Press the MENU button.
Press the PLAY or STOP
button to point to "USER'S
SET UP".
Then. press the F.FWD
button.
M
E % L,
TIMEI4 PROG,q,qMMIN,
PlCTUHE
CONTROL
SETTPNG
CLOCK
CHANNEL
SET bu
_. USERS
SET
Up
'/SHIp
SET
Up
_ANGUAG
E [_N
_LISH
CAPTION
[OF_
ZER_
RE_IJR_
Press the PLAY or STOP
button to point to
"AUTO RETURN".
Press the F.FWD or REW
button until [ON] appears.
IJ!IL}_S
SE I hIp
qENT_L
[O_F]
REPEAl
PL _
OFF
I
_- AUTO RETbRN
!ONj
When ail the timer recordings are completed,
the
TV/VCR will rewind to the beginning of the
recorded
program(s).
NOTE:
• If you press the PWR button while tape is
rewinding, the Auto Return will stop.
Press the PLAY button.
Repeat steps [1] and [2], select [OFF] using the
F.FWD or REW button.
If there is a power failure
of any kind, the unit
will retain its memory
for this feature.
- 29 -
EN
9F06
Advertisement
