Advertisement
Make sure:
• Use the remote control for this procedure,
• TV/VCR power must be turned on.
• Insert a prerecorded
tape.
• Before playback, follow steps below•
This function enables you to irrlprove the picture
quality when playing back worn cassettes such
as rented tapes
The TV/VCR allows you to repeat a tape
indefinitely
without using the PLAY button.
q here are two selections for Repeat Playback•
ALL REPEAT: Repeat playback from the
beginning
to the end of the tape.
BLANK REPEAT: Repeat playback
from the
beginning
to a blank part, which is blank for more
than 10 seconds.
Press the MENU button.
Press the PLAY or STOP
button to point to "USER'S
SET UP".
Then, press the F,FWD
button•
Press the MENU button•
"
,
Press the PLAY or STOP
,_;_.,_,-_N_<
i
button to point to "USERS
,:..,._ ,_]....
SET UP".
_
S[
_S_t;
Up
<H,PSEr_
Then. press the F.FWD
_pTI
_N _FF
.'_ ,_,P,
i
button
NME 51 ,M
h
]i]
r,
i _.
E h
, :,l_•
!lr,iF
S_ I_F4_H
......
J
Press the PLAY or STOP
button to point to "RENTAL".
Press the F.FWD or REW
button until [ON] appears.
Press the PLAY or STOP
.
'_ " ....
button to point to
,,_._: r_.
"REPEAT PLAY".
_UTG _il
URN i_H!
\
.
Press the F.FWD or REW
button repeatedly until your
desired selection
[ALL] or
[BLANK] appears.
Press the MENU button to return to the TV mode.
Press the MENU button to return to the TV mode.
Press the PLAY button to start playback.
"RENTAL PLAYI_" appears.
• Once you select the Rental mode, it stays in
effect even after you turn off the TV/VCR.
Repeat steps [1] and [2], select [OFF] using the
F.FWD or REW button on the remote
control• Press the MENU button to return to TV
mode.
If there is a power failure
of any kind, the unit
will retain its memory for this feature.
Press the PLAY button to start the Repeat Play,
"REPEAT PLAYI_" appears•
• Once you select the Repeat Play mode,
it stays in effect even after you turn off the
TV/VCR.
• If the Rental mode is set [ON], the "RENTAL
PLAYI_" display has priority•
Repeat steps [1] and [2], select [OFF] using the
F.FWD or REW button on the remote
control• Press the MENU button to return to TV
mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
- 23 -
EN
9F06
Advertisement
