Advertisement
Set the clock accurately for proper automatic timer
recording• If a Public Broadcasting Station (PBS) is
available in your area, follow "AUTO CLOCK
SETTING".
If there isn't one, then follow
"MANUAL CLOCK SETTING".
,..
•
You can have the TV/VCR set the clock time and
date automatically
via the Extended Data
Service (XDS) of your tocai Public Broadcasting
Station (PBS) channel.
Make
sure:
• Use the remote
control
for this
procedure.
• TV/VCR power must be turned on
• Antenna connections are correct.
• Cable converter
box is turned on if your
TV/VCR is connected
to one,
• The channel is properly set in advance. (See
page 14.)
NOTES:
• Auto clock setting only needs to be set once.
But it can be done again if the clock's time
has become incorrect for some reason.
• If the TV/VCR is connected
directly to a cable
converter
box or satellite box, the local PBS
station must be selected on the cable box
itself. The TV/VCR must be set to the output
channel of the cable or satellite box (usually
channel 3 or 4), to be able to set up or correct
the clock automatically.
• The TVNCR cannot control the channels of the
cable or satellite box.
Press the MENU button.
Press the PLAY or STOP
button to point to "SETTING
CLOCK".
Then, press the F.FWD
button.
M
E N U
T,P+I[ZF_pRQGRA_._MING
PIC [U_E
CONTROL
SET] ING CLOCK
CHANNEL
SET
UP
[ I_;ER S SE [ Up
V {Hip
SIT
[JP
I
LANGUAG[
IEN(;i
iSt_]
CAPTIr3N
[OFF!
ZERO
RE TUriN
TIMF
_[ Ar_c_I
Press the F.FWD or REW
button repeatedly
until [ON]
appears
Press the PLAY or STOP
button to point to "AUTO
CLOCK CH".
: .....
1-hen press the FFWD or
REW button until the
channel
number for yol;t I( ,;_31 PBS st_tiop
appears
Leave menu set to [AUTO] if you do not know the
local PBS channel number The TV!VCR will
automatically
search all available channels and
select it
Press the MENU button to return to TV mode.
Turn the TV/VCR off. The Auto Clock functions
automatically
when the TV/VCR is off.
If you choose
[AUTO]:
• The TV/VCR must scan each channel for a
couple of seconds to determine
if it is
transmitting
an XDS signal,
• If the time automatically
set by [AUTO] is
incorrect, it may have accessed the XDS
signal from a PBS channel outside your time
zone. In this case, you must manually enter
the correct PBS channel.
• If [AUTO] cannot locate a XDS signal, you
must set the clock manually.
- 15-
EN
9F06
Advertisement
