Installing Network Components On Your Computer; Windows Vista - Epson EMP 7900 Network Manual

Installing Network Components on Your Computer

Before configuring the network interface and printing from the computer, you
need to install the necessary network components (such as TCP/IP) and
assign an IP address and subnet mask for your computer, depending on the
printing method you want to use. See the section in this chapter appropriate
for your operating system.

Windows Vista

For Windows Vista, use the following procedure to install the necessary
components.
Note:
❏ The Windows operating system CD may be required during the installation.
❏ When using TCP/IP for printing, you need to set the IP address, the subnet mask,
and the default gateway of the computer.
, click Control Panel, and then click View network status and
1. Click
tasks or double-click Network and Sharing Center.
2. Click View Status, and then click the Properties button.
Note:
If the User Account Control screen appears, click the Continue button.
12
Setting Up Your System for Network Printing